Skip to content
FiftyCalc Free calculators for all 50 states

Shaft Size Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the power the shaft carries, its speed and the allowable shear stress of the material to get the minimum solid shaft diameter for torsion.

Result

Sample figures

Minimum diameter—mm

Torque T (N·m) —

  • Torque (lbf·in)—
  • Minimum diameter (in)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Shaft Size Calculator

Power: enter 0 or more. Prefilled example: 10.

Power unit

Power unit: choose horsepower (hp) or kilowatts (kW). Prefilled example: horsepower (hp).

Shaft speed, in RPM: enter 0 or more. Prefilled example: 1,750.

Allowable shear stress: enter 0 or more. Prefilled example: 6,000.

Stress unit

Stress unit: choose psi or MPa. Prefilled example: psi.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Power: enter 0 or more.
  2. Power unit: choose horsepower (hp) or kilowatts (kW).
  3. Shaft speed, in RPM: enter 0 or more.
  4. Allowable shear stress: enter 0 or more.
  5. Stress unit: choose psi or MPa.
  6. Read the result: Minimum diameter; the panel also shows Torque T (N·m), Torque (lbf·in) and Minimum diameter (in).

How this calculator works

T = P ÷ ω with ω = 2π × rpm ÷ 60. For a solid round shaft in pure torsion the maximum shear stress is τ = 16T ÷ (πd³), so d = ∛(16T ÷ (πτ_allow)).

This sizes for torsion only. Real shafts also carry bending, keyways and fatigue loads, which call for design codes (such as ASME B106.1M) and safety factors. 1 hp = 745.6999 W, 1 psi = 6,894.757 Pa, 1 lbf·in = 0.1129848 N·m (NIST SP 811, Appendix B.9 conversion factors, read on nist.gov on 2026-10-27).

The formula

  1. T=p×pun×2×π÷60
  2. D=1,000×16×Tπ×τ×tu3
Symbols used in the formula
SymbolMeaningUnit
pPower
puPower unit
nShaft speedRPM
τAllowable shear stress
tuStress unit
TTorque T (N·m)
DMinimum diametermm

Worked example

Power10
Power unithorsepower (hp)
Shaft speed1,750 RPM
Allowable shear stress6,000
Stress unitpsi
Torque T (N·m)40.6909
Torque (lbf·in)360.145
Minimum diameter (in)0.6736
  1. T=10×745.71,750×2×3.14159÷60=40.6909
  2. D=1,000×16×40.69093.14159×6,000×6,894.763=17.1106

Minimum diameter 17.1106 mm

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What diameter carries 10 hp at 1,750 rpm with 6,000 psi allowable?

About 0.674 in (17.11 mm) in pure torsion.

Why does a faster shaft need less diameter?

For the same power, torque falls as speed rises, and the diameter goes with the cube root of torque.

Questions answered

Related calculators