Skip to content
FiftyCalc Free calculators for all 50 states

Shear Strain Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter how far the top face moves sideways and the height between the faces (same unit) to get the shear strain.

Result

Sample figures

Engineering shear strain γ = Δx ÷ L (rad)—

Shear angle φ = atan(Δx ÷ L) (degrees) —

  • Shear stress τ = G × γ (MPa)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Shear Strain Calculator

Sideways displacement Δx: enter 0 or more. Prefilled example: 0.5.

Height between the faces L (same unit): enter 0 or more. Prefilled example: 100.

Shear modulus G, optional (MPa) for the stress: enter 0 or more. Prefilled example: 0.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Sideways displacement Δx: enter 0 or more.
  2. Height between the faces L (same unit): enter 0 or more.
  3. Shear modulus G, optional (MPa) for the stress: enter 0 or more.
  4. Read the result: Engineering shear strain γ = Δx ÷ L (rad); the panel also shows Shear angle φ = atan(Δx ÷ L) (degrees) and Shear stress τ = G × γ (MPa).

How this calculator works

Engineering shear strain γ = Δx ÷ L = tan φ, where φ is the angle the side face tilts. For small strains γ ≈ φ in radians. Hooke's law in shear gives τ = G × γ.

The formula

  1. Gam=dxl
Symbols used in the formula
SymbolMeaningUnit
dxSideways displacement Δx
lHeight between the faces Lsame unit
GamEngineering shear strain γ = Δx ÷ Lrad

Worked example

Sideways displacement Δx0.5
Height between the faces L (same unit)100
Shear modulus G, optional (MPa) for the stress0
Shear angle φ = atan(Δx ÷ L) (degrees)0.2865
Shear stress τ = G × γ (MPa)0
  1. Gam=0.5100=0.005

Engineering shear strain γ = Δx ÷ L (rad) 0.005

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What is the strain for 0.5 mm of offset over 100 mm?

0.005 (rad), an angle of about 0.2865°.

Is shear strain dimensionless?

Yes; it is a length over a length, often stated in radians.

Questions answered

Related calculators