Skip to content
FiftyCalc Free calculators for all 50 states

Sled Calculator

Test cases replayed : 3 of 3 match · Methodology · No outside source listed

Enter the slope angle, the length of the run and the friction between sled and snow to estimate speed at the bottom.

Result

Sample figures

Speed at the bottom—m/s

Acceleration along the slope (m/s²) —

  • Speed at the bottom (mph)—
  • Time for the run (s)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Sled Calculator

Slope angle, in °: enter a number from 0 to 89. Prefilled example: 15.

Length of the run along the slope: enter 0 or more. Prefilled example: 50.

Length unit

Length unit: choose meters (m) or feet (ft). Prefilled example: meters (m).

Kinetic friction coefficient μ (e.g. 0.05 to 0.2): enter 0 or more. Prefilled example: 0.1.

Starting speed, in m/s: enter 0 or more. Prefilled example: 0.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Slope angle, in °: enter a number from 0 to 89.
  2. Length of the run along the slope: enter 0 or more.
  3. Length unit: choose meters (m) or feet (ft).
  4. Kinetic friction coefficient μ (e.g. 0.05 to 0.2): enter 0 or more.
  5. Starting speed, in m/s: enter 0 or more.
  6. Read the result: Speed at the bottom; the panel also shows Acceleration along the slope (m/s²), Speed at the bottom (mph) and Time for the run (s).

How this calculator works

On an incline with kinetic friction, a = g × (sin θ − μ cos θ), Newton's second law with friction force μ × m × g × cos θ. Then v = √(v₀² + 2aL) and t = (v − v₀) ÷ a, the constant-acceleration equations. g = 9.80665 m/s² (NIST CODATA 2022 values, read on physics.nist.gov/cuu on 2026-10-27).

Air drag is ignored, so long runs come out faster than reality. If the acceleration is zero or negative, the sled does not speed up and the result shows a dash.

The formula

  1. A=9.80665×(sin⁡(rad⁡(ang))−μ×cos⁡(rad⁡(ang)))
  2. V=v02+2×A×len×lu
Symbols used in the formula
SymbolMeaningUnit
angSlope angle°
lenLength of the run along the slope
luLength unit
μKinetic friction coefficient μ (e.g. 0.05 to 0.2)
v0Starting speedm/s
AAcceleration along the slope (m/s²)
VSpeed at the bottomm/s
rad(x)the angle x, converted from degrees to radians.

Worked example

Slope angle15 °
Length of the run along the slope50
Length unitmeters (m)
Kinetic friction coefficient μ (e.g. 0.05 to 0.2)0.1
Starting speed0 m/s
Acceleration along the slope (m/s²)1.5909
Speed at the bottom (mph)28.2147
Time for the run (s)7.9283
  1. A=9.80665×(sin⁡(rad⁡(15))−0.1×cos⁡(rad⁡(15)))=1.5909
  2. V=02+2×1.5909×50×1=12.6131

Speed at the bottom 12.6131 m/s

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How fast is a sled after 50 m on a 15° slope with μ = 0.1?

About 12.61 m/s (28.21 mph), in about 7.93 s, without air drag.

Does the rider's weight matter?

Not in this model: mass cancels out. In reality heavier riders lose relatively less to air drag.

Questions answered

Related calculators