Skip to content
FiftyCalc Free calculators for all 50 states

Slenderness Ratio Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the column length, its end conditions and its section properties (one length unit) to get the slenderness ratio.

Result

Sample figures

Slenderness ratio KL ÷ r—

Radius of gyration r = √(I ÷ A) —

  • Effective length KL—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Slenderness Ratio Calculator

Unbraced length L: enter 0 or more. Prefilled example: 120.

End conditions (theoretical K)

End conditions (theoretical K): choose Pinned-pinned (K = 1.0), Fixed-fixed (K = 0.5), Fixed-pinned (K = 0.7) or Fixed-free (K = 2.0). Prefilled example: Pinned-pinned (K = 1.0).

Moment of inertia I about the weak axis (length⁴): enter 0 or more. Prefilled example: 12.3.

Cross-section area A (length²): enter 0 or more. Prefilled example: 7.08.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Unbraced length L: enter 0 or more.
  2. End conditions (theoretical K): choose Pinned-pinned (K = 1.0), Fixed-fixed (K = 0.5), Fixed-pinned (K = 0.7) or Fixed-free (K = 2.0).
  3. Moment of inertia I about the weak axis (length⁴): enter 0 or more.
  4. Cross-section area A (length²): enter 0 or more.
  5. Read the result: Slenderness ratio KL ÷ r; the panel also shows Radius of gyration r = √(I ÷ A) and Effective length KL.

How this calculator works

Slenderness ratio = K × L ÷ r, with r = √(I ÷ A) the radius of gyration about the axis that buckles first. K is the theoretical effective length factor of Euler buckling for each pair of end conditions.

Design codes (such as AISC 360 for steel) recommend adjusted K values and slenderness limits; use them for design.

The formula

  1. R=ia
  2. Kl=k×l
  3. Sr=KlR
Symbols used in the formula
SymbolMeaning
lUnbraced length L
kEnd conditions (theoretical K)
iMoment of inertia I about the weak axis (length⁴)
aCross-section area A (length²)
RRadius of gyration r = √(I ÷ A)
KlEffective length KL
SrSlenderness ratio KL ÷ r

Worked example

Unbraced length L120
End conditions (theoretical K)Pinned-pinned (K = 1.0)
Moment of inertia I about the weak axis (length⁴)12.3
Cross-section area A (length²)7.08
Radius of gyration r = √(I ÷ A)1.3181
Effective length KL120
  1. R=12.37.08=1.31806
  2. Kl=1×120=120
  3. Sr=1201.31806=91.0427

Slenderness ratio KL ÷ r 91.0427

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What is the radius of gyration for I = 12.3 and A = 7.08?

About 1.318 (same length unit).

Why does a higher ratio matter?

Slender columns buckle at lower loads: Euler's critical stress falls with the square of KL/r.

Questions answered

Related calculators