Skip to content
FiftyCalc Free calculators for all 50 states

Slope Percentage Calculator

Test cases replayed : 4 of 4 match · Methodology · No outside source listed

Enter the rise and run of a slope, or its angle or percent, to get every other way of writing it.

Result

Sample figures

Percent grade (rise ÷ run × 100)—

Angle (degrees) —

  • Ratio 1 : n (run per unit of rise)—
  • Rise per foot of run (inches)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Slope Percentage Calculator

You know the

You know the: choose Rise and run, Angle in degrees or Percent grade. Prefilled example: Rise and run.

Rise (vertical change): enter a number. Prefilled example: 1.

Run (horizontal distance, same unit): enter a number. Prefilled example: 12.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. You know the: choose Rise and run, Angle in degrees or Percent grade.
  2. Rise (vertical change): enter a number.
  3. Run (horizontal distance, same unit): enter a number.
  4. Angle (angle mode only), in °: enter a number.
  5. Percent grade (% mode only): enter a number.
  6. Read the result: Percent grade (rise ÷ run × 100); the panel also shows Angle (degrees), Ratio 1 : n (run per unit of rise) and Rise per foot of run (inches).

How this calculator works

Percent grade = rise ÷ run × 100. The angle is arctan(rise ÷ run), and back from an angle θ the grade is tan θ × 100.

A 100% grade is a 45° slope (rise equals run), not a vertical wall. The ratio 1 : n gives the run for each unit of rise, as in the 1:12 maximum ramp slope of the 2010 ADA Standards (§ 405.2), which is 8.33%.

Worked example

You know theRise and run
Rise (vertical change)1
Run (horizontal distance, same unit)12
Percent grade (rise ÷ run × 100)8.33%
Angle (degrees)4.7636
Ratio 1 : n (run per unit of rise)12
Rise per foot of run (inches)1

Frequently asked questions

Is a 100% slope vertical?

No. 100% means the rise equals the run, a 45° angle. A vertical slope would be an infinite percent.

How do I convert degrees to percent slope?

Take the tangent of the angle and multiply by 100: 5° is tan 5° × 100 ≈ 8.75%.

What slope is 1/4 inch per foot?

0.25 ÷ 12 × 100 ≈ 2.08%, a common minimum for drainage.

Questions answered

Related calculators