Skip to content
FiftyCalc Free calculators for all 50 states

Snow Load Calculator

Test cases replayed : 3 of 3 match · Methodology · No outside source listed

Enter the ground snow load for your site (from the building department or the ASCE 7 map) and the exposure, thermal and importance factors.

Result

Sample figures

Roof snow load used (psf)—

Flat roof snow load 0.7 Ce Ct Is pg (psf) —

  • Low-slope minimum (psf)—
  • Total snow on the roof (pounds)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Snow Load Calculator

Ground snow load pg (lb per square foot): enter 0 or more. Prefilled example: 30.

Exposure factor Ce: enter 0 or more. Prefilled example: 1.0.

Thermal factor Ct: enter 0 or more. Prefilled example: 1.0.

Importance factor Is: enter 0 or more. Prefilled example: 1.0.

Low-slope roof (under 15°)

Low-slope roof (under 15°): choose Yes or No. Prefilled example: Yes.

Roof area, horizontal projection, in sq ft: enter 0 or more. Prefilled example: 1,500.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Ground snow load pg (lb per square foot): enter 0 or more.
  2. Exposure factor Ce: enter 0 or more.
  3. Thermal factor Ct: enter 0 or more.
  4. Importance factor Is: enter 0 or more.
  5. Low-slope roof (under 15°): choose Yes or No.
  6. Roof area, horizontal projection, in sq ft: enter 0 or more.
  7. Read the result: Roof snow load used (psf); the panel also shows Flat roof snow load 0.7 Ce Ct Is pg (psf), Low-slope minimum (psf) and Total snow on the roof (pounds).

How this calculator works

Flat roof snow load pf = 0.7 × Ce × Ct × Is × pg, with pg the ground snow load, Ce the exposure factor, Ct the thermal factor and Is the importance factor (ASCE/SEI 7). On low-slope roofs the load is not less than Is × pg where pg is 20 psf or less, and 20 × Is where pg is above 20 psf.

Formula and minimums read on 2026-10-27 on Engineers Edge, Flat Roof Snow Loads (https://engineersedge.com/analysis/flat_roof_snow_loads_9726.htm). The factor tables and the ground snow load map are in ASCE 7 and your local building code; the defaults of 1.0 are placeholders.

This is an estimate for understanding a roof's load, not a structural design: drifts, sliding snow and rain-on-snow add loads that an engineer must check.

Worked example

Ground snow load pg (lb per square foot)30
Exposure factor Ce1
Thermal factor Ct1
Importance factor Is1
Low-slope roof (under 15°)Yes
Roof area, horizontal projection1,500 sq ft
Flat roof snow load 0.7 Ce Ct Is pg (psf)21.00
Low-slope minimum (psf)20.00
Roof snow load used (psf)21.00
Total snow on the roof (pounds)31,500

Frequently asked questions

What roof snow load does 30 psf of ground snow give?

With all factors at 1.0: 0.7 × 30 = 21 psf, above the 20 psf low-slope minimum.

Why is the roof load lower than the ground load?

Wind and building heat remove part of the snow; the 0.7 factor and Ce, Ct account for that.

Questions answered

Related calculators