Skip to content
FiftyCalc Free calculators for all 50 states

Spring Rate Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the wire size, the mean coil diameter, the number of active coils and the wire's shear modulus to get the spring rate.

Result

Sample figures

Spring rate (lbf/in)—

Spring rate (N/m) —

  • Spring rate (N/mm)—
  • Spring index C = D ÷ d—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Spring Rate Calculator

Shear modulus of the wire G: enter 0 or more. Prefilled example: 11,500,000.

Modulus unit

Modulus unit: choose psi or GPa. Prefilled example: psi.

Wire diameter d: enter 0 or more. Prefilled example: 0.08.

Mean coil diameter D: enter 0 or more. Prefilled example: 0.75.

Length unit

Length unit: choose inches (in) or millimeters (mm). Prefilled example: inches (in).

Active coils Na: enter 0 or more. Prefilled example: 10.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Shear modulus of the wire G: enter 0 or more.
  2. Modulus unit: choose psi or GPa.
  3. Wire diameter d: enter 0 or more.
  4. Mean coil diameter D: enter 0 or more.
  5. Length unit: choose inches (in) or millimeters (mm).
  6. Active coils Na: enter 0 or more.
  7. Read the result: Spring rate (lbf/in); the panel also shows Spring rate (N/m), Spring rate (N/mm) and Spring index C = D ÷ d.

How this calculator works

k = G × d⁴ ÷ (8 × D³ × Na), the standard rate of a helical spring (from torsion of the wire), with D the mean coil diameter and Na the active coils. G is the wire's shear modulus; take it from your wire maker.

1 psi = 6,894.757 Pa and 1 lbf/in = 175.1268 N/m (NIST SP 811, Appendix B.9 conversion factors, read on nist.gov on 2026-10-27).

The formula

  1. K=g×gu×(d×lu)48×(dm×lu)3×na
  2. L=K175.1268
Symbols used in the formula
SymbolMeaningUnit
gShear modulus of the wire G
guModulus unit
dWire diameter d
dmMean coil diameter D
luLength unit
naActive coils Na
KSpring rate (N/m)
LSpring ratelbf/in

Worked example

Shear modulus of the wire G11,500,000
Modulus unitpsi
Wire diameter d0.08
Mean coil diameter D0.75
Length unitinches (in)
Active coils Na10
Spring rate (N/m)2,444.1997
Spring rate (N/mm)2.4442
Spring index C = D ÷ d9.375
  1. K=11,500,000×6,894.76×(0.08×0.0254)48×(0.75×0.0254)3×10=2,444.2
  2. L=2,444.2175.1268=13.9567

Spring rate (lbf/in) 13.9567

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What is the rate of 0.08 in wire, 0.75 in coils, 10 active coils, G = 11.5 Mpsi?

About 13.96 lbf/in.

Why do end coils not count?

Closed or ground end coils sit solid and do not deflect, so only the active coils set the rate.

Questions answered

Related calculators