Skip to content
FiftyCalc Free calculators for all 50 states

Stress Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the axial force and the cross-section area to get the stress; add Young's modulus to get the strain.

Result

Sample figures

Normal stress σ—MPa

Normal stress (psi) —

  • Strain ε = σ ÷ E—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Stress Calculator

Axial force F: enter 0 or more. Prefilled example: 50,000.

Force unit

Force unit: choose newtons (N), kilonewtons (kN) or pounds-force (lbf). Prefilled example: newtons (N).

Cross-section area A: enter 0 or more. Prefilled example: 500.

Area unit

Area unit: choose square millimeters (mm²), square meters (m²) or square inches (in²). Prefilled example: square millimeters (mm²).

Young's modulus E, optional (GPa) for the strain: enter 0 or more. Prefilled example: 200.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Axial force F: enter 0 or more.
  2. Force unit: choose newtons (N), kilonewtons (kN) or pounds-force (lbf).
  3. Cross-section area A: enter 0 or more.
  4. Area unit: choose square millimeters (mm²), square meters (m²) or square inches (in²).
  5. Young's modulus E, optional (GPa) for the strain: enter 0 or more.
  6. Read the result: Normal stress σ; the panel also shows Normal stress (psi) and Strain ε = σ ÷ E.

How this calculator works

σ = F ÷ A, the axial force over the cross-section area perpendicular to it. Within the elastic range, strain ε = σ ÷ E (Hooke's law).

1 lbf = 4.448222 N, 1 in² = 0.00064516 m², 1 psi = 6,894.757 Pa (NIST SP 811, Appendix B.9 conversion factors, read on nist.gov on 2026-10-27).

The formula

  1. Mpa=f×fu÷(a×au)1,000,000
Symbols used in the formula
SymbolMeaningUnit
fAxial force F
fuForce unit
aCross-section area A
auArea unit
MpaNormal stress σMPa

Worked example

Axial force F50,000
Force unitnewtons (N)
Cross-section area A500
Area unitsquare millimeters (mm²)
Young's modulus E, optional (GPa) for the strain200
Normal stress (psi)14,503.7744
Strain ε = σ ÷ E0.0005
  1. Mpa=50,000×1÷(500×0.000001)1,000,000=100

Normal stress σ 100 MPa

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What is the stress of 50 kN on 500 mm²?

100 MPa (14,503.77 psi).

What strain goes with it for E = 200 GPa?

0.0005, half a millimeter per meter.

Questions answered

Related calculators