Stress Concentration Factor Calculator
Test cases replayed : 2 of 2 match · Methodology · No outside source listed
Enter the force and the net section area to get the nominal stress, then either the measured peak stress or a known Kt.
Result
Stress concentration factor Kt = σ_max ÷ σ_nom
Nominal stress σ_nom = F ÷ A (MPa)
- Peak stress Kt × σ_nom (MPa)
Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.
This browser did not allow copying. The sentence is in the box below, already selected: copy it with your keyboard or the menu.
How to use this calculator
Fill in the fields in this order; each step takes you to its field.
- Force F, in N: enter 0 or more.
- Net section area at the notch, in mm²: enter 0 or more.
- Peak stress, measured or computed (0 if unknown), in MPa: enter 0 or more.
- Known Kt, used when the peak stress is 0: enter 0 or more.
- Read the result: Stress concentration factor Kt = σ_max ÷ σ_nom; the panel also shows Nominal stress σ_nom = F ÷ A (MPa) and Peak stress Kt × σ_nom (MPa).
How this calculator works
Kt = σ_max ÷ σ_nom: the ratio of the peak elastic stress at a hole, groove or fillet to the nominal stress on the net section. With N and mm², stress is in MPa.
Kt for a given geometry comes from charts (for example Peterson's Stress Concentration Factors), finite-element analysis or strain gauges; enter it if you know it.
The formula
| Symbol | Meaning | Unit |
|---|---|---|
| Force F | N | |
| Net section area at the notch | mm² | |
| Peak stress, measured or computed (0 if unknown) | MPa | |
| Known Kt, used when the peak stress is 0 | ||
| Nominal stress σ_nom = F ÷ A | MPa | |
| Stress concentration factor Kt = σ_max ÷ σ_nom |
Worked example
| Force F | 20,000 N |
|---|---|
| Net section area at the notch | 200 mm² |
| Peak stress, measured or computed (0 if unknown) | 270 MPa |
| Known Kt, used when the peak stress is 0 | 2.5 |
| Nominal stress σ_nom = F ÷ A (MPa) | 100 |
|---|---|
| Peak stress Kt × σ_nom (MPa) | 270 |
Stress concentration factor Kt = σ_max ÷ σ_nom 2.7
Each step uses the unrounded value of the step before it; figures on this page are rounded for display.
Frequently asked questions
What is Kt if the peak is 270 MPa and the nominal 100 MPa?
2.7.
Does Kt depend on the material?
No. The elastic Kt depends only on geometry and load type; the fatigue factor Kf also depends on the material's notch sensitivity.