Skip to content
FiftyCalc Free calculators for all 50 states

TDS Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter a conductivity reading at 25 °C and a conversion factor to estimate the dissolved solids in mg/L.

Result

Sample figures

Total dissolved solids (mg/L, about ppm)—

Total dissolved solids (g/L) —

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

TDS Calculator

Specific conductance at 25 °C: enter 0 or more. Prefilled example: 500.

Conductance unit

Conductance unit: choose µS/cm or mS/cm. Prefilled example: µS/cm.

Conversion factor A (0.55 to 0.75 for most natural waters): enter 0 or more. Prefilled example: 0.67.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Specific conductance at 25 °C: enter 0 or more.
  2. Conductance unit: choose µS/cm or mS/cm.
  3. Conversion factor A (0.55 to 0.75 for most natural waters): enter 0 or more.
  4. Read the result: Total dissolved solids (mg/L, about ppm); the panel also shows Total dissolved solids (g/L).

How this calculator works

TDS (mg/L) = A × specific conductance (µS/cm at 25 °C). The USGS reference text on water chemistry gives A between 0.55 and 0.75 for waters of ordinary composition: near the low end where bicarbonate and chloride dominate, at or above the high end for sulfate-rich water (Hem, USGS Water-Supply Paper 2254, 1985, pp. 67 and 165, read on pubs.usgs.gov on 2026-10-27).

The factor is not constant over wide ranges; for best accuracy, calibrate A for your water from one laboratory TDS result (A = TDS ÷ conductance).

The formula

  1. Tds=ec×eu×k
Symbols used in the formula
SymbolMeaningUnit
ecSpecific conductance at 25 °C
euConductance unit
kConversion factor A (0.55 to 0.75 for most natural waters)
TdsTotal dissolved solids (about ppm)mg/L

Worked example

Specific conductance at 25 °C500
Conductance unitµS/cm
Conversion factor A (0.55 to 0.75 for most natural waters)0.67
Total dissolved solids (g/L)0.335
  1. Tds=500×1×0.67=335

Total dissolved solids (mg/L, about ppm) 335

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What is the TDS of water at 500 µS/cm?

About 275 to 375 mg/L with A from 0.55 to 0.75; 335 mg/L with A = 0.67.

Is a TDS meter reading the same as a lab TDS?

No. A meter measures conductivity and multiplies it by a fixed factor; a lab weighs the residue left after evaporation.

Related calculators