Skip to content
FiftyCalc Free calculators for all 50 states

Tension Calculator

Test cases replayed : 3 of 3 match · Methodology · No outside source listed

Enter the load, its vertical acceleration and the rope angle to get the tension in each rope.

Result

Sample figures

Tension in each rope—N

Total vertical force m(g + a) (N) —

  • Tension in each rope (lbf)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Tension Calculator

Mass of the load: enter 0 or more. Prefilled example: 50.

Mass unit

Mass unit: choose kilograms (kg) or pounds (lb). Prefilled example: kilograms (kg).

Upward acceleration (0 at rest, negative if accelerating down), in m/s²: enter a number. Prefilled example: 0.

Support: choose One vertical rope or Two ropes, symmetric, at an angle. Prefilled example: One vertical rope.

Angle of each rope above horizontal (two ropes), in °: enter a number from 1 to 90. Prefilled example: 45.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Mass of the load: enter 0 or more.
  2. Mass unit: choose kilograms (kg) or pounds (lb).
  3. Upward acceleration (0 at rest, negative if accelerating down), in m/s²: enter a number.
  4. Support: choose One vertical rope or Two ropes, symmetric, at an angle.
  5. Angle of each rope above horizontal (two ropes), in °: enter a number from 1 to 90.
  6. Read the result: Tension in each rope; the panel also shows Total vertical force m(g + a) (N) and Tension in each rope (lbf).

How this calculator works

Newton's second law on the load: total upward force = m(g + a), with g = 9.80665 m/s² (NIST CODATA 2022 values, read on physics.nist.gov/cuu on 2026-10-27). For two symmetric ropes at angle θ above horizontal, each carries T = m(g + a) ÷ (2 sin θ). Ropes are taken as massless.

The formula

  1. Tt=m×μ×(9.80665+a)
  2. T={Ttif r=1Tt2×sin⁡(rad⁡(ang))otherwise
Symbols used in the formula
SymbolMeaningUnit
mMass of the load
μMass unit
aUpward acceleration (0 at rest, negative if accelerating down)m/s²
rSupport (1: One vertical rope; 2: Two ropes, symmetric, at an angle)
angAngle of each rope above horizontal (two ropes)°
TtTotal vertical force m(g + a) (N)
TTension in each ropeN
rad(x)the angle x, converted from degrees to radians.

Worked example

Mass of the load50
Mass unitkilograms (kg)
Upward acceleration (0 at rest, negative if accelerating down)0 m/s²
SupportOne vertical rope
Angle of each rope above horizontal (two ropes)45 °
Total vertical force m(g + a) (N)490.3325
Tension in each rope (lbf)110.2311
  1. Tt=50×1×(9.80665+0)=490.332
  2. T=490.332

Tension in each rope 490.3325 N

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What is the tension holding 50 kg at rest?

About 490.33 N (110.23 lbf).

Why does a flatter angle raise the tension?

As θ falls, sin θ falls, so each rope must pull harder to give the same vertical force.

Questions answered

Related calculators