Skip to content
FiftyCalc Free calculators for all 50 states

Torsional Constant Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the outer diameter, and the inner diameter for a tube (0 for solid), in one length unit.

Result

Sample figures

Torsional constant J = π(D⁴ − d⁴) ÷ 32 (length⁴)—

Torsional section modulus J ÷ (D/2) (length³) —

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Torsional Constant Calculator

Outer diameter D: enter 0 or more. Prefilled example: 50.

Inner diameter d (0 for a solid shaft): enter 0 or more. Prefilled example: 0.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Outer diameter D: enter 0 or more.
  2. Inner diameter d (0 for a solid shaft): enter 0 or more.
  3. Read the result: Torsional constant J = π(D⁴ − d⁴) ÷ 32 (length⁴); the panel also shows Torsional section modulus J ÷ (D/2) (length³).

How this calculator works

For circular sections the torsional constant equals the polar moment of inertia: J = πD⁴ ÷ 32 for a solid shaft and J = π(D⁴ − d⁴) ÷ 32 for a tube. Maximum shear stress τ = T ÷ (J ÷ (D/2)) and twist angle θ = TL ÷ (GJ).

Non-circular sections have a torsional constant smaller than their polar moment; this calculator covers round sections only.

The formula

  1. J=π×(d4−di4)32
Symbols used in the formula
SymbolMeaning
dOuter diameter D
diInner diameter d (0 for a solid shaft)
JTorsional constant J = π(D⁴ − d⁴) ÷ 32 (length⁴)

Worked example

Outer diameter D50
Inner diameter d (0 for a solid shaft)0
Torsional section modulus J ÷ (D/2) (length³)24,543.6926
  1. J=3.14159×(504−04)32=613,592.32

Torsional constant J = π(D⁴ − d⁴) ÷ 32 (length⁴) 613,592.3152

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What is J of a 50 mm solid shaft?

About 613,592.3 mm⁴.

Why are tubes efficient in torsion?

Material far from the center adds most to J, so removing the core costs little stiffness.

Questions answered

Related calculators