Skip to content
FiftyCalc Free calculators for all 50 states

Torsional Spring Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the wire diameter, mean coil diameter, number of active coils and the wire's Young's modulus to get the torsion spring rate.

Result

Sample figures

Rate (N·mm/degree)—

Rate (N·mm/rad) —

  • Rate (N·mm/turn)—
  • Rate (lbf·in/degree)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Torsional Spring Calculator

Young's modulus of the wire E: enter 0 or more. Prefilled example: 207.

Modulus unit

Modulus unit: choose GPa or psi. Prefilled example: GPa.

Wire diameter d: enter 0 or more. Prefilled example: 2.

Mean coil diameter D: enter 0 or more. Prefilled example: 20.

Length unit

Length unit: choose millimeters (mm) or inches (in). Prefilled example: millimeters (mm).

Active coils N: enter 0 or more. Prefilled example: 6.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Young's modulus of the wire E: enter 0 or more.
  2. Modulus unit: choose GPa or psi.
  3. Wire diameter d: enter 0 or more.
  4. Mean coil diameter D: enter 0 or more.
  5. Length unit: choose millimeters (mm) or inches (in).
  6. Active coils N: enter 0 or more.
  7. Read the result: Rate (N·mm/degree); the panel also shows Rate (N·mm/rad), Rate (N·mm/turn) and Rate (lbf·in/degree).

How this calculator works

k = E × d⁴ ÷ (64 × D × N) per radian: the coiled wire works as a beam in bending, with second moment I = πd⁴/64 and length πDN, so θ = M × πDN ÷ (EI). Friction between coils and arm length are ignored, so real springs are somewhat softer.

1 psi = 0.006894757 N/mm² and 1 lbf·in = 112.9848 N·mm (NIST SP 811, Appendix B.9 conversion factors, read on nist.gov on 2026-10-27).

The formula

  1. K=e×eu×(d×lu)464×dm×lu×n
  2. Kd=K×π180
Symbols used in the formula
SymbolMeaning
eYoung's modulus of the wire E
euModulus unit
dWire diameter d
dmMean coil diameter D
luLength unit
nActive coils N
KRate (N·mm/rad)
KdRate (N·mm/degree)

Worked example

Young's modulus of the wire E207
Modulus unitGPa
Wire diameter d2
Mean coil diameter D20
Length unitmillimeters (mm)
Active coils N6
Rate (N·mm/rad)431.25
Rate (N·mm/turn)2,709.6237
Rate (lbf·in/degree)0.0666
  1. K=207×1,000×(2×1)464×20×1×6=431.25
  2. Kd=431.25×3.14159180=7.52673

Rate (N·mm/degree) 7.5267

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What is the rate of 2 mm wire, 20 mm coils, 6 coils, E = 207 GPa?

About 7.527 N·mm per degree.

What is the difference from a compression spring?

A torsion spring's wire bends (rate uses E), while a compression spring's wire twists (rate uses G).

Questions answered

Related calculators