Skip to content
FiftyCalc Free calculators for all 50 states

Torsional Stiffness Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the shaft's shear modulus, outer and inner diameters, length and an applied torque to get its stiffness and twist angle.

Result

Sample figures

Torsional stiffness GJ ÷ L (N·m/rad)—

Polar moment J (mm⁴) —

  • Torsional stiffness (N·m/degree)—
  • Twist angle under the torque (degrees)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Torsional Stiffness Calculator

Shear modulus G, in GPa: enter 0 or more. Prefilled example: 79.

Outer diameter D, in mm: enter 0 or more. Prefilled example: 40.

Inner diameter d (0 for solid), in mm: enter 0 or more. Prefilled example: 0.

Length L, in m: enter 0 or more. Prefilled example: 1.

Applied torque, in N·m: enter 0 or more. Prefilled example: 500.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Shear modulus G, in GPa: enter 0 or more.
  2. Outer diameter D, in mm: enter 0 or more.
  3. Inner diameter d (0 for solid), in mm: enter 0 or more.
  4. Length L, in m: enter 0 or more.
  5. Applied torque, in N·m: enter 0 or more.
  6. Read the result: Torsional stiffness GJ ÷ L (N·m/rad); the panel also shows Polar moment J (mm⁴), Torsional stiffness (N·m/degree) and Twist angle under the torque (degrees).

How this calculator works

k = G × J ÷ L for a round shaft in torsion, with J = π(D⁴ − d⁴) ÷ 32, so the twist is θ = T × L ÷ (G × J) radians. G in pascals, J in m⁴, L in meters.

The formula

  1. J=π×(d4−di4)32
  2. K=g×1,000,000,000×J×(1×10−12)l
Symbols used in the formula
SymbolMeaningUnit
gShear modulus GGPa
dOuter diameter Dmm
diInner diameter d (0 for solid)mm
lLength Lm
JPolar moment J (mm⁴)
KTorsional stiffness GJ ÷ L (N·m/rad)

Worked example

Shear modulus G79 GPa
Outer diameter D40 mm
Inner diameter d (0 for solid)0 mm
Length L1 m
Applied torque500 N·m
Polar moment J (mm⁴)251,327.4123
Torsional stiffness (N·m/degree)346.5328
Twist angle under the torque (degrees)1.4429
  1. J=3.14159×(404−04)32=251,327.41
  2. K=79×1,000,000,000×251,327.41×(1×10−12)1=19,854.87

Torsional stiffness GJ ÷ L (N·m/rad) 19,854.8656

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What is the stiffness of a 40 mm solid steel shaft (G = 79 GPa), 1 m long?

About 19,854.9 N·m/rad.

How does length affect it?

Stiffness is inversely proportional to length: twice as long, half as stiff.

Questions answered

Related calculators