Twist Rate Calculator
Test cases replayed : 2 of 2 match · Methodology · No outside source listed
Enter the bullet diameter and length to estimate the barrel twist (inches per turn) that stabilizes it, using the Greenhill rule.
Result
Twist rate (inches per turn, 1 : x)
Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.
This browser did not allow copying. The sentence is in the box below, already selected: copy it with your keyboard or the menu.
How to use this calculator
Fill in the fields in this order; each step takes you to its field.
- Bullet diameter, in in: enter 0 or more.
- Bullet length, in in: enter 0 or more.
- Bullet specific gravity (10.9 for lead core): enter 0 or more.
- Muzzle velocity: choose Up to 2,800 ft/s (C = 150) or Above 2,800 ft/s (C = 180).
- Read the result: Twist rate (inches per turn, 1 : x).
How this calculator works
Greenhill formula (A. G. Greenhill, 1879, simplified as a rule of thumb): twist = C × D² / L × √(SG / 10.9), with D the bullet diameter and L its length in inches. C = 150, or 180 above about 2,800 ft/s.
SG is the bullet's specific gravity; 10.9 is the value used for lead-core bullets, for which the square-root term equals 1. A result of 12 means one turn in 12 inches, written 1:12. A faster twist (smaller number) stabilizes longer bullets.
The rule is approximate: modern twist models such as Miller's use bullet mass, velocity and air density as well.
The formula
| Symbol | Meaning | Unit |
|---|---|---|
| Bullet diameter | in | |
| Bullet length | in | |
| Bullet specific gravity (10.9 for lead core) | ||
| Muzzle velocity | ||
| Twist rate (inches per turn, 1 : x) |
Worked example
| Bullet diameter | 0.308 in |
|---|---|
| Bullet length | 1.24 in |
| Bullet specific gravity (10.9 for lead core) | 10.9 |
| Muzzle velocity | Up to 2,800 ft/s (C = 150) |
Twist rate (inches per turn, 1 : x) 11.5
Each step uses the unrounded value of the step before it; figures on this page are rounded for display.
Frequently asked questions
What twist rate do I need for a .308 bullet 1.24 in long?
Greenhill gives about 1 turn in 11.5 inches at C = 150.
Is a faster twist always better?
No. Too fast a twist adds spin and pressure without benefit and can harm thin-jacketed bullets; the aim is just enough stability.