Skip to content
FiftyCalc Free calculators for all 50 states

Vertical Curve Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the entering and exiting grades in percent, the curve length, the PVC elevation and the distance from the PVC where you want the elevation.

Result

Sample figures

Elevation at that distance—ft

High or low point, distance from the PVC (feet; outside 0 to L means none on the curve) —

  • High or low point elevation (feet)—
  • PVT elevation (feet)—
  • K value, length per percent of grade change (feet)—

The unit choice applies to the fields you fill in. Results stay in the units written with them.

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Vertical Curve Calculator

Units: switches the fields between the two unit systems.

Entering grade g1, in percent: enter a number. Prefilled example: 3.

Exiting grade g2, in percent: enter a number. Prefilled example: -2.

Curve length, in ft: enter 0.01 or more. Prefilled example: 600.

PVC elevation, in ft: enter a number. Prefilled example: 1,000.

Distance from the PVC, in ft: enter 0 or more. Prefilled example: 200.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Units: switches the fields between the two unit systems.
  2. Entering grade g1, in percent: enter a number.
  3. Exiting grade g2, in percent: enter a number.
  4. Curve length, in ft: enter 0.01 or more.
  5. PVC elevation, in ft: enter a number.
  6. Distance from the PVC, in ft: enter 0 or more.
  7. Read the result: Elevation at that distance; the panel also shows High or low point, distance from the PVC (feet; outside 0 to L means none on the curve), High or low point elevation (feet), PVT elevation (feet) and K value, length per percent of grade change (feet).

How this calculator works

An equal-tangent vertical curve is a parabola: elevation y(x) = E(PVC) + g1 × x + (g2 − g1) ÷ (2L) × x², with grades as decimals and x measured from the PVC. Setting the slope g1 + (g2 − g1) × x ÷ L to zero gives the high or low point at x = −g1 × L ÷ (g2 − g1).

K = L ÷ A, the horizontal length needed for a 1% change of grade, with A = |g2 − g1| in percent; AASHTO's A Policy on Geometric Design of Highways and Streets sets minimum K values by design speed. Terms and K definition read on 2026-10-27 in the Upper Great Plains Transportation Institute course notes, Vertical Curves (https://www.ugpti.org/dotsc/engcenter/downloads/2010-07_VerticalCurves.pdf).

The formula

  1. Ex=E2+g1100×x+(g2−g1)÷100÷L2×x2
Symbols used in the formula
SymbolMeaningUnit
g1Entering grade g1%
g2Exiting grade g2%
LCurve lengthft
E2PVC elevationft
xDistance from the PVCft
ExElevation at that distanceft

Worked example

Entering grade g13%
Exiting grade g2-2%
Curve length600 ft
PVC elevation1,000 ft
Distance from the PVC200 ft
High or low point, distance from the PVC (feet; outside 0 to L means none on the curve)360.00
High or low point elevation (feet)1,005.4
PVT elevation (feet)1,003
K value, length per percent of grade change (feet)120.00
  1. Ex=1,000+3100×200+(−2−3)÷100÷6002×2002=1,004.33

Elevation at that distance 1,004.3333 ft

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

Where is the high point of a 600-foot curve from +3% to −2%?

x = 3 × 600 ÷ 5 = 360 feet from the PVC; with the PVC at 1,000 feet it is at 1,005.4 feet.

What is the K value of that curve?

600 ÷ 5 = 120 feet per percent.

Questions answered

Related calculators