Skip to content
FiftyCalc Free calculators for all 50 states

Wind Load Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the wind speed, the area facing the wind and its drag (force) coefficient to estimate the wind force.

Result

Sample figures

Wind force (lbf)—

Dynamic (velocity) pressure (lb/ft²) —

  • Wind force (newtons)—
  • Dynamic pressure (pascals)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Wind Load Calculator

Wind speed, in mph: enter 0 or more. Prefilled example: 90.

Area facing the wind, in sq ft: enter 0 or more. Prefilled example: 20.

Drag or force coefficient (depends on shape): enter 0 or more. Prefilled example: 1.2.

Air density (slug/ft³; 0.002375 at sea level, standard day): enter 0 or more. Prefilled example: 0.002375.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Wind speed, in mph: enter 0 or more.
  2. Area facing the wind, in sq ft: enter 0 or more.
  3. Drag or force coefficient (depends on shape): enter 0 or more.
  4. Air density (slug/ft³; 0.002375 at sea level, standard day): enter 0 or more.
  5. Read the result: Wind force (lbf); the panel also shows Dynamic (velocity) pressure (lb/ft²), Wind force (newtons) and Dynamic pressure (pascals).

How this calculator works

Aerodynamic force F = ½ ρ V² × A × Cd: ½ ρ V² is the dynamic pressure of the wind, A the area facing it and Cd a shape coefficient. Speed in mph is converted to ft/s (× 5,280 / 3,600).

Sea-level standard density: ρ = p / (1718 × (T + 459.7)) with p = 2,116 lb/ft² and T = 59 °F gives 0.002375 slug/ft³ (NASA Glenn Research Center atmosphere model, grc.nasa.gov, read October 27, 2026). Conversions: 1 lbf = 4.448222 N, 1 lb/ft² = 47.88026 Pa (NIST SP 811, read October 27, 2026).

This is a physics estimate. Building and structural design in the US uses the ASCE 7 procedure and local building codes, with gust, exposure and height factors; it is not replaced by this calculator.

The formula

  1. Q=0.5×ρ×(v×5,280÷3,600)2
  2. F=Q×cd×a
Symbols used in the formula
SymbolMeaningUnit
vWind speedmph
aArea facing the windsq ft
cdDrag or force coefficient (depends on shape)
ρAir density (slug/ft³; 0.002375 at sea level, standard day)
QDynamic (velocity) pressurelb/ft²
FWind forcelbf

Worked example

Wind speed90 mph
Area facing the wind20 sq ft
Drag or force coefficient (depends on shape)1.2
Air density (slug/ft³; 0.002375 at sea level, standard day)0.002375
Dynamic (velocity) pressure (lb/ft²)20.69
Wind force (newtons)2,209
Dynamic pressure (pascals)990.7
  1. Q=0.5×0.002375×(90×5,280÷3,600)2=20.691
  2. F=20.691×1.2×20=496.584

Wind force (lbf) 497

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How does wind force change with speed?

With the square of the speed: doubling the wind speed multiplies the force by four.

What drag coefficient should I use?

It depends on the shape and its proportions; look it up for your shape in an engineering reference or the applicable design standard.

Questions answered

Related calculators