Skip to content
FiftyCalc Free calculators for all 50 states

Young's Modulus Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the force, the cross-section area, the original length and how much it stretched to get the stress, strain and Young's modulus.

Result

Sample figures

Young's modulus—GPa

Stress (MPa = N/mm²) —

  • Strain (dimensionless)—
  • Young's modulus (million psi)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Young's Modulus Calculator

Force (newtons, N): enter 0 or more. Prefilled example: 10,000.

Cross-section area, in mm²: enter 0 or more. Prefilled example: 20.

Original length, in mm: enter 0 or more. Prefilled example: 100.

Elongation, in mm: enter 0 or more. Prefilled example: 0.25.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Force (newtons, N): enter 0 or more.
  2. Cross-section area, in mm²: enter 0 or more.
  3. Original length, in mm: enter 0 or more.
  4. Elongation, in mm: enter 0 or more.
  5. Read the result: Young's modulus; the panel also shows Stress (MPa = N/mm²), Strain (dimensionless) and Young's modulus (million psi).

How this calculator works

Hooke's law in the elastic range: E = σ / ε, with stress σ = F / A and strain ε = ΔL / L₀. With force in N and area in mm², stress is in MPa; dividing E by 1,000 gives GPa.

1 psi = 6,894.757 Pa (NIST SP 811, Appendix B, read October 27, 2026). Measure within the linear part of the stress-strain curve, below the yield point (as in ASTM E111).

The formula

  1. S=fa
  2. E=dll0
  3. Gpa=S÷E1,000
Symbols used in the formula
SymbolMeaningUnit
fForce (newtons, N)
aCross-section areamm²
l0Original lengthmm
dlElongationmm
SStress (MPa = N/mm²)
EStrain (dimensionless)
GpaYoung's modulusGPa

Worked example

Force (newtons, N)10,000
Cross-section area20 mm²
Original length100 mm
Elongation0.25 mm
Stress (MPa = N/mm²)500
Strain (dimensionless)0.0025
Young's modulus (million psi)29.01
  1. S=10,00020=500
  2. E=0.25100=0.0025
  3. Gpa=500÷0.00251,000=200

Young's modulus 200.00 GPa

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What does a high Young's modulus mean?

A stiff material: it stretches little under a given stress. Steel is far stiffer than aluminum or plastics.

Is Young's modulus the same as strength?

No. It measures stiffness in the elastic range; strength is the stress at which the material yields or breaks.

Questions answered

Related calculators