Skip to content
FiftyCalc Free calculators for all 50 states

Baluster Calculator

Test cases replayed : 2 of 2 match · Methodology · Sources

Enter the distance between posts, the baluster width and your maximum gap to get the count and the even spacing.

Result

Sample figures

Balusters per section—

Even gap between balusters (inches) —

  • On-center spacing (inches)—
  • Balusters for all sections—

The unit choice applies to the fields you fill in. Results stay in the units written with them.

Estimate for planning only, not tax, legal, financial or medical advice. Check important figures with the official source listed on this page.

Baluster Calculator

Units: switches the fields between the two unit systems.

Clear distance between posts, in in: enter 0 or more. Prefilled example: 72.

Baluster width, in in: enter 0 or more. Prefilled example: 1.5.

Maximum gap between balusters, in in: enter 0.5 or more. Prefilled example: 3.875.

Number of identical sections: enter 1 or more. Prefilled example: 1.

Affiliate link

This is an affiliate link. As an Amazon Associate I earn from qualifying purchases. This does not change the result.

Search Amazon for deck balusters. Visit Amazon

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Units: switches the fields between the two unit systems.
  2. Clear distance between posts, in in: enter 0 or more.
  3. Baluster width, in in: enter 0 or more.
  4. Maximum gap between balusters, in in: enter 0.5 or more.
  5. Number of identical sections: enter 1 or more.
  6. Read the result: Balusters per section; the panel also shows Even gap between balusters (inches), On-center spacing (inches) and Balusters for all sections.

Sources

How this calculator works

With n balusters there are n + 1 equal gaps: gap = (distance − n × width) ÷ (n + 1). The smallest n that keeps the gap at or below your maximum is n = (distance − gap) ÷ (width + gap), rounded up.

The International Residential Code (IRC R312.1.3) requires guard openings that do not let a 4-inch sphere pass, so a maximum just under 4 inches is common. Your local code governs.

The formula

  1. N=ceil⁡(L−gapw+gap)
Symbols used in the formula
SymbolMeaningUnit
LClear distance between postsin
wBaluster widthin
gapMaximum gap between balustersin
NBalusters per section
ceil(x)the smallest whole number not below x.

Worked example

Clear distance between posts72 in
Baluster width1.5 in
Maximum gap between balusters3.875 in
Number of identical sections1
Even gap between balusters (inches)3.75
On-center spacing (inches)5.25
Balusters for all sections13
  1. N=ceil⁡(72−3.8751.5+3.875)=13

Balusters per section 13

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How many balusters for a 6-foot section?

With 1.5-inch balusters and gaps under 3.875 inches, 13 balusters, leaving even 3.75-inch gaps.

Why not just divide by 4 inches on center?

On-center spacing ignores the baluster width at the ends; the even-gap formula makes the first and last gaps match the rest.

Questions answered

Related calculators