Skip to content
FiftyCalc Free calculators for all 50 states

Board on Board Fence Calculator

Test cases replayed : 3 of 3 match · Methodology · No outside source listed

Enter the fence length, picket width and overlap to count the pickets for both rows, the posts and the rails.

Result

Sample figures

Pickets, both rows—

Gap between pickets in each row (inches) —

  • Posts (straight run)—
  • Rails—

The unit choice applies to the fields you fill in. Results stay in the units written with them.

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Board on Board Fence Calculator

Units: switches the fields between the two unit systems.

Fence length, in ft: enter 0 or more. Prefilled example: 100.

Picket width, actual, in in: enter 0.5 or more. Prefilled example: 5.5.

Overlap on each side, in in: enter 0 or more. Prefilled example: 1.

Post spacing, in ft: enter 1 or more. Prefilled example: 8.

Rails per section: enter 1 or more. Prefilled example: 3.

Affiliate link

This is an affiliate link. As an Amazon Associate I earn from qualifying purchases. This does not change the result.

Search Amazon for fencing and fence installation supplies. Visit Amazon

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Units: switches the fields between the two unit systems.
  2. Fence length, in ft: enter 0 or more.
  3. Picket width, actual, in in: enter 0.5 or more.
  4. Overlap on each side, in in: enter 0 or more.
  5. Post spacing, in ft: enter 1 or more.
  6. Rails per section: enter 1 or more.
  7. Read the result: Pickets, both rows; the panel also shows Gap between pickets in each row (inches), Posts (straight run) and Rails.

How this calculator works

In a board-on-board fence the back row leaves gaps of (width − 2 × overlap) and the front row covers each gap, overlapping by the given amount on both sides. Each pair of pickets advances 2 × (width − overlap), so pickets = length (in) ÷ (width − overlap), rounded up.

Posts = sections + 1 for a straight run (sections = length ÷ post spacing, rounded up); add a post per corner or gate side. Rails = sections × rails per section.

The formula

  1. B=ceil⁡(l×12w−o)
Symbols used in the formula
SymbolMeaningUnit
lFence lengthft
wPicket width, actualin
oOverlap on each sidein
BPickets, both rows
ceil(x)the smallest whole number not below x.

Worked example

Fence length100 ft
Picket width, actual5.5 in
Overlap on each side1 in
Post spacing8 ft
Rails per section3
Gap between pickets in each row (inches)3.5
Posts (straight run)14
Rails39
  1. B=ceil⁡(100×125.5−1)=267

Pickets, both rows 267

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How many pickets for 100 feet of board-on-board fence?

With 5.5-inch pickets overlapping 1 inch, 1,200 ÷ 4.5 = 266.7, so 267 pickets.

How much more wood than a standard privacy fence?

With these figures, 267 pickets instead of 219 butted pickets, about 22% more.

Questions answered

Related calculators