Skip to content
FiftyCalc Free calculators for all 50 states

Clay Shrinkage Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Mark a line on a wet test bar, measure it again after firing, then enter the size you want the finished piece to be.

Result

Sample figures

Total shrinkage—

Size to make the piece wet —

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Clay Shrinkage Calculator

Line length on the wet (plastic) test bar: enter 0 or more. Prefilled example: 10.

Same line after firing: enter 0 or more. Prefilled example: 8.8.

Finished size you want (same unit): enter 0 or more. Prefilled example: 6.

Affiliate link

This is an affiliate link. As an Amazon Associate I earn from qualifying purchases. This does not change the result.

Search Amazon for pottery clay. Visit Amazon

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Line length on the wet (plastic) test bar: enter 0 or more.
  2. Same line after firing: enter 0 or more.
  3. Finished size you want (same unit): enter 0 or more.
  4. Read the result: Total shrinkage; the panel also shows Size to make the piece wet.

How this calculator works

Shrinkage = (wet length − fired length) ÷ wet length × 100, the method potters use with a marked test bar. To get a finished size, divide it by (1 − shrinkage): a 12% clay must be made 1 ÷ 0.88 = 1.136 times the finished size.

Shrinkage depends on the clay body, its water content and the firing temperature, so measure a bar fired in your own kiln to the cone you use.

The formula

  1. S=w−fiw×100
Symbols used in the formula
SymbolMeaningUnit
wLine length on the wet (plastic) test bar
fiSame line after firing
STotal shrinkage%

Worked example

Line length on the wet (plastic) test bar10
Same line after firing8.8
Finished size you want (same unit)6
Size to make the piece wet6.82
  1. S=10−8.810×100=12

Total shrinkage 12%

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

My 10 cm line measures 8.8 cm after firing. What is the shrinkage?

12%.

How big do I make a mug that should be 6 inches tall with 12% shrinkage?

6.82 inches tall when wet (6 ÷ 0.88).

Related calculators