Skip to content
FiftyCalc Free calculators for all 50 states

Pleated Skirt Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter your waist, the visible width of each pleat, the depth folded under it and the total seam allowance.

Result

Sample figures

Fabric width needed—in

Number of pleats —

  • Fabric width needed (yards)—
  • Fabric to waist ratio—

The unit choice applies to the fields you fill in. Results stay in the units written with them.

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Pleated Skirt Calculator

Units: switches the fields between the two unit systems.

Waist measurement, in in: enter 1 or more. Prefilled example: 28.

Visible pleat width, in in: enter 0.1 or more. Prefilled example: 1.

Pleat depth folded under, in in: enter 0 or more. Prefilled example: 1.

Seam allowances, total, in in: enter 0 or more. Prefilled example: 1.25.

Affiliate link

This is an affiliate link. As an Amazon Associate I earn from qualifying purchases. This does not change the result.

Search Amazon for dress fabric. Visit Amazon

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Units: switches the fields between the two unit systems.
  2. Waist measurement, in in: enter 1 or more.
  3. Visible pleat width, in in: enter 0.1 or more.
  4. Pleat depth folded under, in in: enter 0 or more.
  5. Seam allowances, total, in in: enter 0 or more.
  6. Read the result: Fabric width needed; the panel also shows Number of pleats, Fabric width needed (yards) and Fabric to waist ratio.

How this calculator works

Each knife pleat shows a width p on the outside and folds a depth d under it twice (under and back), so it uses p + 2d of fabric. Pleats = waist ÷ p, rounded up; fabric = pleats × (p + 2d) + seam allowances.

When the depth equals the pleat width the fabric is three times the waist, the classic 3:1 pleated skirt.

The formula

  1. N=ceil⁡(Wp)
  2. Fab=N×(p+2×d)+sa
Symbols used in the formula
SymbolMeaningUnit
WWaist measurementin
pVisible pleat widthin
dPleat depth folded underin
saSeam allowances, totalin
NNumber of pleats
FabFabric width neededin
ceil(x)the smallest whole number not below x.

Worked example

Waist measurement28 in
Visible pleat width1 in
Pleat depth folded under1 in
Seam allowances, total1.25 in
Number of pleats28
Fabric width needed (yards)2.3681
Fabric to waist ratio3
  1. N=ceil⁡(281)=28
  2. Fab=28×(1+2×1)+1.25=85.25

Fabric width needed 85.25 in

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How much fabric for a 28-inch waist with 1-inch pleats 1 inch deep?

28 pleats × 3 in + 1.25 in seams = 85.25 inches, about 2.37 yards of width.

Does the formula work for box pleats?

Yes, if p is the width of one half of the box pleat as it appears from outside and d its fold depth.

Related calculators