Skip to content
FiftyCalc Free calculators for all 50 states

Quilt Binding Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the quilt size, the extra length for corners and joining, the strip width you cut and the usable width of the fabric.

Result

Sample figures

Fabric needed—yd

Binding length (inches) —

  • Strips to cut—
  • Fabric needed (inches)—

The unit choice applies to the fields you fill in. Results stay in the units written with them.

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Quilt Binding Calculator

Units: switches the fields between the two unit systems.

Quilt width, in in: enter 1 or more. Prefilled example: 60.

Quilt length, in in: enter 1 or more. Prefilled example: 80.

Extra length for corners and joining, in in: enter 0 or more. Prefilled example: 12.

Strip width, in in: enter 0.5 or more. Prefilled example: 2.5.

Usable fabric width, in in: enter 1 or more. Prefilled example: 40.

Affiliate link

This is an affiliate link. As an Amazon Associate I earn from qualifying purchases. This does not change the result.

Search Amazon for quilting fabric and sewing supplies. Visit Amazon

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Units: switches the fields between the two unit systems.
  2. Quilt width, in in: enter 1 or more.
  3. Quilt length, in in: enter 1 or more.
  4. Extra length for corners and joining, in in: enter 0 or more.
  5. Strip width, in in: enter 0.5 or more.
  6. Usable fabric width, in in: enter 1 or more.
  7. Read the result: Fabric needed; the panel also shows Binding length (inches), Strips to cut and Fabric needed (inches).

How this calculator works

Binding length = perimeter of the quilt, 2 × (width + length), plus an allowance for mitered corners and the final join. Strips = length ÷ usable fabric width (selvage to selvage, minus selvages), rounded up.

Fabric = strips × strip width; yards = inches ÷ 36. Strips cut across the width of fabric (straight grain) are assumed.

The formula

  1. Ln=2×(W+L)+x
  2. N=ceil⁡(Lnfw)
  3. Fab=N×sw
  4. Yd=Fab36
Symbols used in the formula
SymbolMeaningUnit
WQuilt widthin
LQuilt lengthin
xExtra length for corners and joiningin
swStrip widthin
fwUsable fabric widthin
LnBinding lengthinches
NStrips to cut
FabFabric neededinches
YdFabric neededyd
ceil(x)the smallest whole number not below x.

Worked example

Quilt width60 in
Quilt length80 in
Extra length for corners and joining12 in
Strip width2.5 in
Usable fabric width40 in
Binding length (inches)292
Strips to cut8
Fabric needed (inches)20
  1. Ln=2×(60+80)+12=292
  2. N=ceil⁡(29240)=8
  3. Fab=8×2.5=20
  4. Yd=2036=0.555556

Fabric needed 0.5556 yd

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How much binding for a 60 × 80 quilt?

280 + 12 = 292 inches: 8 strips of 2.5 inches, 20 inches of fabric, about 0.56 yard.

What strip width is common?

Many quilters cut 2 1/4 or 2 1/2 inch strips for a double-fold binding; enter the width you cut.

Related calculators