Skip to content
FiftyCalc Free calculators for all 50 states

Concrete Block Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the wall length and height and the face size of your blocks to count them.

Result

Sample figures

Blocks needed—

Wall area (square feet) —

The unit choice applies to the fields you fill in. Results stay in the units written with them.

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Concrete Block Calculator

Units: switches the fields between the two unit systems.

Wall length, in ft: enter 0 or more. Prefilled example: 40.

Wall height, in ft: enter 0 or more. Prefilled example: 4.

Block face length, nominal with mortar joint (example value; enter your block's size), in in: enter 1 or more. Prefilled example: 16.

Block face height, nominal with mortar joint (example value; enter your block's size), in in: enter 1 or more. Prefilled example: 8.

Breakage allowance, in percent: enter a number from 0 to 20. Prefilled example: 5.

Affiliate link

This is an affiliate link. As an Amazon Associate I earn from qualifying purchases. This does not change the result.

Search Amazon for concrete mix and concrete tools. Visit Amazon

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Units: switches the fields between the two unit systems.
  2. Wall length, in ft: enter 0 or more.
  3. Wall height, in ft: enter 0 or more.
  4. Block face length, nominal with mortar joint (example value; enter your block's size), in in: enter 1 or more.
  5. Block face height, nominal with mortar joint (example value; enter your block's size), in in: enter 1 or more.
  6. Breakage allowance, in percent: enter a number from 0 to 20.
  7. Read the result: Blocks needed; the panel also shows Wall area (square feet).

How this calculator works

Blocks per square foot = 144 ÷ (nominal block length × nominal block height, in inches, joint included); an 8 × 16 in face gives 144 ÷ 128 = 1.125.

Blocks = wall area × blocks per sq ft × (1 + allowance ÷ 100), rounded up. Deduct large openings from the area first.

The formula

  1. A=l×h
  2. B=ceil⁡(A×144bl×bh×(1+w100))
Symbols used in the formula
SymbolMeaningUnit
lWall lengthft
hWall heightft
blBlock face length, nominal with mortar joint (example value; enter your block's size)in
bhBlock face height, nominal with mortar joint (example value; enter your block's size)in
wBreakage allowance%
AWall areasquare feet
BBlocks needed
ceil(x)the smallest whole number not below x.

Worked example

Wall length40 ft
Wall height4 ft
Block face length, nominal with mortar joint (example value; enter your block's size)16 in
Block face height, nominal with mortar joint (example value; enter your block's size)8 in
Breakage allowance5%
Wall area (square feet)160.0
  1. A=40×4=160
  2. B=ceil⁡(160×14416×8×(1+5100))=189

Blocks needed 189

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How many cinder blocks are in a square foot?

144 ÷ (nominal length × nominal height in inches); for an 8 × 16 in face, 1.125.

How many blocks for a 4 ft high, 40 ft wall?

160 sq ft × 1.125 = 180 blocks, about 189 with 5% extra.

Questions answered

Related calculators