Skip to content
FiftyCalc Free calculators for all 50 states

Concrete Block Fill Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the wall size, the actual size of your blocks and how many cells you fill to get the core-fill volume in cubic feet, yards and bags.

Result

Sample figures

Fill with waste—cu yd

Blocks in the wall —

  • Core volume per block (cubic feet)—
  • Fill with waste (cubic feet)—
  • Premix bags if mixed from bags—

The unit choice applies to the fields you fill in. Results stay in the units written with them.

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Concrete Block Fill Calculator

Units: switches the fields between the two unit systems.

Wall length, in ft: enter 0 or more. Prefilled example: 40.

Wall height, in ft: enter 0 or more. Prefilled example: 4.

Block length, actual (example value; use your block's data sheet), in in: enter 1 or more. Prefilled example: 15.625.

Block height, actual (example value; use your block's data sheet), in in: enter 1 or more. Prefilled example: 7.625.

Mortar joint (example value), in in: enter a number from 0 to 1. Prefilled example: 0.375.

Block width, actual (example value; use your block's data sheet), in in: enter 0.5 or more. Prefilled example: 7.625.

Percent solid of the block (from the manufacturer, example): enter a number from 0 to 100. Prefilled example: 52.

Share of cells filled, in percent: enter a number from 0 to 100. Prefilled example: 100.

Waste allowance, in percent: enter a number from 0 to 50. Prefilled example: 5.

Bag yield (cubic feet per bag; typical value, use the figure printed on your bag): enter 0.01 or more. Prefilled example: 0.6.

Affiliate link

This is an affiliate link. As an Amazon Associate I earn from qualifying purchases. This does not change the result.

Search Amazon for concrete mix and concrete tools. Visit Amazon

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Units: switches the fields between the two unit systems.
  2. Wall length, in ft: enter 0 or more.
  3. Wall height, in ft: enter 0 or more.
  4. Block length, actual (example value; use your block's data sheet), in in: enter 1 or more.
  5. Block height, actual (example value; use your block's data sheet), in in: enter 1 or more.
  6. Mortar joint (example value), in in: enter a number from 0 to 1.
  7. Block width, actual (example value; use your block's data sheet), in in: enter 0.5 or more.
  8. Percent solid of the block (from the manufacturer, example): enter a number from 0 to 100.
  9. Share of cells filled, in percent: enter a number from 0 to 100.
  10. Waste allowance, in percent: enter a number from 0 to 50.
  11. Bag yield (cubic feet per bag; typical value, use the figure printed on your bag): enter 0.01 or more.
  12. Read the result: Fill with waste; the panel also shows Blocks in the wall, Core volume per block (cubic feet), Fill with waste (cubic feet) and Premix bags if mixed from bags.

How this calculator works

Each block with its joint covers (length + joint) × (height + joint) square inches of wall, so blocks = wall area (sq ft) × 144 ÷ that face.

Core volume per block = the block's gross volume (length × height × width, actual) × (1 − percent solid ÷ 100). The percent solid comes from the block's data sheet. Multiply by the share of cells you fill, then the waste allowance.

The formula

  1. B=ceil⁡(l×h×144(bl+j)×(bh+j))
  2. Co=bl×bh×bw×(1−s÷100)1,728
  3. Cu=B×Co×c100×(1+w100)
  4. Y=Cu27
Symbols used in the formula
SymbolMeaningUnit
lWall lengthft
hWall heightft
blBlock length, actual (example value; use your block's data sheet)in
bhBlock height, actual (example value; use your block's data sheet)in
jMortar joint (example value)in
bwBlock width, actual (example value; use your block's data sheet)in
sPercent solid of the block (from the manufacturer, example)
cShare of cells filled%
wWaste allowance%
BBlocks in the wall
CoCore volume per blockcubic feet
CuFill with wastecubic feet
YFill with wastecu yd
ceil(x)the smallest whole number not below x.

Worked example

Wall length40 ft
Wall height4 ft
Block length, actual (example value; use your block's data sheet)15.625 in
Block height, actual (example value; use your block's data sheet)7.625 in
Mortar joint (example value)0.375 in
Block width, actual (example value; use your block's data sheet)7.625 in
Percent solid of the block (from the manufacturer, example)52
Share of cells filled100%
Waste allowance5%
Bag yield (cubic feet per bag; typical value, use the figure printed on your bag)0.6
Blocks in the wall180
Core volume per block (cubic feet)0.2523
Fill with waste (cubic feet)47.69
Premix bags if mixed from bags80
  1. B=ceil⁡(40×4×144(15.625+0.375)×(7.625+0.375))=180
  2. Co=15.625×7.625×7.625×(1−52÷100)1,728=0.252346
  3. Cu=180×0.252346×100100×(1+5100)=47.6935
  4. Y=47.693527=1.76643

Fill with waste 1.77 cu yd

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How much grout fills one 8-inch block?

At 52% solid, 15.625 × 7.625 × 7.625 × 0.48 ÷ 1,728 = 0.2523 cubic feet per block.

Do I have to fill every cell?

Not always. Engineered walls often grout only cells with rebar; follow the plans or your local code.

Questions answered

Related calculators