Skip to content
FiftyCalc Free calculators for all 50 states

Cv Flow Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

A valve's Cv is the flow of water in gallons per minute it passes with a 1 psi pressure drop. Enter the Cv, the pressure drop and the liquid's specific gravity.

Result

Sample figures

Flow rate (US gallons per minute)—

Flow rate (liters per minute) —

  • Cv needed for the target flow—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Cv Flow Calculator

Valve flow coefficient Cv: enter 0 or more. Prefilled example: 10.

Pressure drop across the valve, in psi: enter 0.0001 or more. Prefilled example: 25.

Specific gravity of the liquid (water = 1): enter 0.01 or more. Prefilled example: 1.

Target flow for sizing (gpm): enter 0 or more. Prefilled example: 40.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Valve flow coefficient Cv: enter 0 or more.
  2. Pressure drop across the valve, in psi: enter 0.0001 or more.
  3. Specific gravity of the liquid (water = 1): enter 0.01 or more.
  4. Target flow for sizing (gpm): enter 0 or more.
  5. Read the result: Flow rate (US gallons per minute); the panel also shows Flow rate (liters per minute) and Cv needed for the target flow.

How this calculator works

For a non-flashing liquid in turbulent flow, Q = Cv × √(ΔP ÷ SG), with Q in US gallons per minute, ΔP in psi and SG the specific gravity relative to water. This follows from the definition of Cv (ANSI/ISA-75.01 sizing equations). Turned around, Cv = Q × √(SG ÷ ΔP).

1 US gallon = 3.785411784 L, exact by definition (NIST SP 811, Appendix B (nist.gov/pml/special-publication-811, read 2026-10-27)). Gases and flashing or choked flow need the full sizing equations.

The formula

  1. Q=cv×dpsg
Symbols used in the formula
SymbolMeaningUnit
cvValve flow coefficient Cv
dpPressure drop across the valvepsi
sgSpecific gravity of the liquid (water = 1)
QFlow rateUS gallons per minute

Worked example

Valve flow coefficient Cv10
Pressure drop across the valve25 psi
Specific gravity of the liquid (water = 1)1
Target flow for sizing (gpm)40
Flow rate (liters per minute)189.2706
Cv needed for the target flow8
  1. Q=10×251=50

Flow rate (US gallons per minute) 50

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What flow does a Cv of 10 give at 25 psi?

Q = 10 × √25 = 50 gpm of water.

What is the difference between Cv and Kv?

Kv is the metric version: m³/h of water at a 1 bar drop. Both describe the same valve in different units.

Related calculators