Skip to content
FiftyCalc Free calculators for all 50 states

Darcy's Law Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Water seeps through porous ground at a rate set by the soil's hydraulic conductivity and the slope of the water table. Enter the conductivity, area, head difference and distance.

Result

Sample figures

Flow rate Q (m³/day)—

Hydraulic gradient Δh ÷ L —

  • Darcy flux q = Q ÷ A (m/day)—
  • Average seepage velocity (m/day)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Darcy's Law Calculator

Hydraulic conductivity K (m/day): enter 0 or more. Prefilled example: 10.

Cross-sectional area of flow, in m²: enter 0 or more. Prefilled example: 100.

Head difference Δh (m): enter 0 or more. Prefilled example: 2.

Flow path length L, in m: enter 0.0001 or more. Prefilled example: 50.

Effective porosity (fraction, e.g. 0.25): enter a number from 0.001 to 1. Prefilled example: 0.25.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Hydraulic conductivity K (m/day): enter 0 or more.
  2. Cross-sectional area of flow, in m²: enter 0 or more.
  3. Head difference Δh (m): enter 0 or more.
  4. Flow path length L, in m: enter 0.0001 or more.
  5. Effective porosity (fraction, e.g. 0.25): enter a number from 0.001 to 1.
  6. Read the result: Flow rate Q (m³/day); the panel also shows Hydraulic gradient Δh ÷ L, Darcy flux q = Q ÷ A (m/day) and Average seepage velocity (m/day).

How this calculator works

Darcy's law: Q = K A (Δh ÷ L), with K the hydraulic conductivity, A the cross-sectional area, Δh the drop in hydraulic head over the distance L. The Darcy flux is q = Q ÷ A; the water actually moves faster through the pores, at q ÷ n where n is the effective porosity.

It holds for slow, laminar flow, which covers most groundwater. Conductivity spans many orders of magnitude, from clays to gravels, so use a measured value.

The formula

  1. Q=k×a×dhl
Symbols used in the formula
SymbolMeaningUnit
kHydraulic conductivity Km/day
aCross-sectional area of flowm²
dhHead difference Δhm
lFlow path length Lm
QFlow rate Qm³/day

Worked example

Hydraulic conductivity K (m/day)10
Cross-sectional area of flow100 m²
Head difference Δh (m)2
Flow path length L50 m
Effective porosity (fraction, e.g. 0.25)0.25
Darcy flux q = Q ÷ A (m/day)0.4
Average seepage velocity (m/day)1.6
Hydraulic gradient Δh ÷ L0.04
  1. Q=10×100×250=40

Flow rate Q (m³/day) 40

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

Is the Darcy flux the real water speed?

No. Water only flows through the pore space, so its average speed is the flux divided by the effective porosity.

What does a gradient of 0.04 mean?

The water table drops 4 cm for every meter of distance along the flow path.

Related calculators