Skip to content
FiftyCalc Free calculators for all 50 states

Deck Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the deck size and board details. Boards are assumed to run along the deck length.

Result

Sample figures

Boards to buy—

Deck area (square feet) —

  • Rows of boards—
  • Linear feet of decking—

The unit choice applies to the fields you fill in. Results stay in the units written with them.

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Deck Calculator

Units: switches the fields between the two unit systems.

Deck length, along the boards, in ft: enter 0 or more. Prefilled example: 16.

Deck width, across the boards, in ft: enter 0 or more. Prefilled example: 12.

Board width, actual (example value; measure your boards), in in: enter 0.5 or more. Prefilled example: 5.5.

Gap between boards, in in: enter a number from 0 to 0.5. Prefilled example: 0.1875.

Board length

Board length: choose 8 ft, 10 ft, 12 ft, 16 ft or 20 ft. Prefilled example: 16 ft.

Waste allowance (typical value; replace it with your own estimate or your supplier's advice), in percent: enter a number from 0 to 30. Prefilled example: 10.

Affiliate link

This is an affiliate link. As an Amazon Associate I earn from qualifying purchases. This does not change the result.

Search Amazon for woodworking and deck building tools. Visit Amazon

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Units: switches the fields between the two unit systems.
  2. Deck length, along the boards, in ft: enter 0 or more.
  3. Deck width, across the boards, in ft: enter 0 or more.
  4. Board width, actual (example value; measure your boards), in in: enter 0.5 or more.
  5. Gap between boards, in in: enter a number from 0 to 0.5.
  6. Board length: choose 8 ft, 10 ft, 12 ft, 16 ft or 20 ft.
  7. Waste allowance (typical value; replace it with your own estimate or your supplier's advice), in percent: enter a number from 0 to 30.
  8. Read the result: Boards to buy; the panel also shows Deck area (square feet), Rows of boards and Linear feet of decking.

How this calculator works

Rows = deck width (in) ÷ (board width + gap), rounded up. Linear feet = rows × deck length. Boards = linear feet × (1 + waste ÷ 100) ÷ board length, rounded up.

Picking boards at least as long as the deck avoids butt joints; the waste allowance covers cuts and defects.

The formula

  1. R=ceil⁡(w×12b+gap)
  2. Lf=R×l
  3. Bo=ceil⁡(Lf×(1+wa÷100)bl)
Symbols used in the formula
SymbolMeaningUnit
lDeck length, along the boardsft
wDeck width, across the boardsft
bBoard width, actual (example value; measure your boards)in
gapGap between boardsin
blBoard length
waWaste allowance (typical value; replace it with your own estimate or your supplier's advice)%
RRows of boards
LfLinear feet of decking
BoBoards to buy
ceil(x)the smallest whole number not below x.

Worked example

Deck length, along the boards16 ft
Deck width, across the boards12 ft
Board width, actual (example value; measure your boards)5.5 in
Gap between boards0.1875 in
Board length16 ft
Waste allowance (typical value; replace it with your own estimate or your supplier's advice)10%
Deck area (square feet)192.0
Rows of boards26
Linear feet of decking416.0
  1. R=ceil⁡(12×125.5+0.1875)=26
  2. Lf=26×16=416
  3. Bo=ceil⁡(416×(1+10÷100)16)=29

Boards to buy 29

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How many deck boards for a 12×16 deck?

With 5.5-inch boards and a 3/16-inch gap: 26 rows of 16 ft, about 29 boards with 10% waste.

What gap should deck boards have?

Follow the spacing given by the board maker or your lumber supplier, and enter it as the gap.

Questions answered

Related calculators