Skip to content
FiftyCalc Free calculators for all 50 states

Deck Framing Calculator

Test cases replayed : 3 of 3 match · Methodology · No outside source listed

Enter the deck width along the house, how far it projects, the joist spacing and the post spacing your design allows along the beam. You get the number of joists and the framing lengths to buy.

Result

Sample figures

Joists, end joists included—

Joist lumber (lineal ft) —

  • Ledger plus rim board (lineal ft)—
  • Joist hangers if both ends are hung—
  • Posts for one beam—
  • Deck area (sq ft)—

The unit choice applies to the fields you fill in. Results stay in the units written with them.

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Deck Framing Calculator

Units: switches the fields between the two unit systems.

Deck width along the house, in ft: enter 1 or more. Prefilled example: 16.

Deck projection, joist length, in ft: enter 1 or more. Prefilled example: 12.

Joist spacing, on center (in)

Joist spacing, on center (in): choose 12 in on center, 16 in on center or 24 in on center. Prefilled example: 16 in on center.

Maximum post spacing along the beam, from your design, in ft: enter 1 or more. Prefilled example: 8.

Affiliate link

This is an affiliate link. As an Amazon Associate I earn from qualifying purchases. This does not change the result.

Search Amazon for woodworking and deck building tools. Visit Amazon

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Units: switches the fields between the two unit systems.
  2. Deck width along the house, in ft: enter 1 or more.
  3. Deck projection, joist length, in ft: enter 1 or more.
  4. Joist spacing, on center (in): choose 12 in on center, 16 in on center or 24 in on center.
  5. Maximum post spacing along the beam, from your design, in ft: enter 1 or more.
  6. Read the result: Joists, end joists included; the panel also shows Joist lumber (lineal ft), Ledger plus rim board (lineal ft), Joist hangers if both ends are hung, Posts for one beam and Deck area (sq ft).

How this calculator works

Joists = deck width (in) ÷ spacing, rounded up, + 1 for the end joist. Joist lumber = joists × projection; buy each joist in the next stock length up.

Ledger and rim board each run the deck width, so together they are 2 × width. Hangers: one at each end of each joist when the joists hang from the ledger at one end and from a flush beam or rim at the other; joists resting on a beam need fewer.

Posts = beam length ÷ post spacing, rounded up, + 1, with the beam taken as long as the deck width. The joist size for a given span, the beam size for a given post spacing and the footing size come from span tables in the building code your town has adopted (such as IRC section R507) or the American Wood Council DCA 6 guide; check them and your permit requirements.

The formula

  1. Nj=ceil⁡(w×12s)+1
Symbols used in the formula
SymbolMeaningUnit
wDeck width along the houseft
sJoist spacing, on centerin
NjJoists, end joists included
ceil(x)the smallest whole number not below x.

Worked example

Deck width along the house16 ft
Deck projection, joist length12 ft
Joist spacing, on center (in)16 in on center
Maximum post spacing along the beam, from your design8 ft
Joist lumber (lineal ft)156
Ledger plus rim board (lineal ft)32
Posts for one beam3
Deck area (sq ft)192
Joist hangers if both ends are hung26
  1. Nj=ceil⁡(16×1216)+1=13

Joists, end joists included 13

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How many joists do I need for a 16-foot deck at 16 inches on center?

192 in ÷ 16 = 12 spaces, so 13 joists including both ends.

Should I use 12, 16 or 24 inch spacing?

It depends on the joist size and span and on the decking: decking makers state the largest joist spacing their boards allow, often smaller for boards laid diagonally. Follow those installation instructions and your local code.

Does this include blocking and stairs?

No. Add blocking, stair stringers, railing posts and hardware separately.

Questions answered

Related calculators