Skip to content
FiftyCalc Free calculators for all 50 states

Drywall Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the room size and wall height, choose the sheet size, and get the sheet count.

Result

Sample figures

Drywall sheets—

Surface to cover (square feet) —

The unit choice applies to the fields you fill in. Results stay in the units written with them.

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Drywall Calculator

Units: switches the fields between the two unit systems.

Room length, in ft: enter 0 or more. Prefilled example: 12.

Room width, in ft: enter 0 or more. Prefilled example: 12.

Wall height, in ft: enter 0 or more. Prefilled example: 8.

Include the ceiling

Include the ceiling: choose No or Yes. Prefilled example: Yes.

Sheet size

Sheet size: choose 4 × 8 ft (32 sq ft), 4 × 10 ft (40 sq ft) or 4 × 12 ft (48 sq ft). Prefilled example: 4 × 8 ft (32 sq ft).

Waste allowance (typical value; replace it with your own estimate or your supplier's advice), in percent: enter a number from 0 to 30. Prefilled example: 10.

Affiliate link

This is an affiliate link. As an Amazon Associate I earn from qualifying purchases. This does not change the result.

Search Amazon for drywall tools and supplies. Visit Amazon

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Units: switches the fields between the two unit systems.
  2. Room length, in ft: enter 0 or more.
  3. Room width, in ft: enter 0 or more.
  4. Wall height, in ft: enter 0 or more.
  5. Include the ceiling: choose No or Yes.
  6. Sheet size: choose 4 × 8 ft (32 sq ft), 4 × 10 ft (40 sq ft) or 4 × 12 ft (48 sq ft).
  7. Waste allowance (typical value; replace it with your own estimate or your supplier's advice), in percent: enter a number from 0 to 30.
  8. Read the result: Drywall sheets; the panel also shows Surface to cover (square feet).

How this calculator works

Area = 2 × (length + width) × height for walls, plus length × width for the ceiling. Sheets = area × (1 + waste ÷ 100) ÷ sheet area, rounded up.

Openings are not deducted: offcuts around doors and windows are rarely reusable, and the waste allowance covers cuts.

The formula

  1. A=2×(l+w)×h+c×l×w
  2. Sh=ceil⁡(A×(1+wa÷100)s)
Symbols used in the formula
SymbolMeaningUnit
lRoom lengthft
wRoom widthft
hWall heightft
cInclude the ceiling
sSheet size
waWaste allowance (typical value; replace it with your own estimate or your supplier's advice)%
ASurface to coversquare feet
ShDrywall sheets
ceil(x)the smallest whole number not below x.

Worked example

Room length12 ft
Room width12 ft
Wall height8 ft
Include the ceilingYes
Sheet size4 × 8 ft (32 sq ft)
Waste allowance (typical value; replace it with your own estimate or your supplier's advice)10%
Surface to cover (square feet)528.0
  1. A=2×(12+12)×8+1×12×12=528
  2. Sh=ceil⁡(528×(1+10÷100)32)=19

Drywall sheets 19

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How many sheets of drywall for a 12×12 room?

With 8 ft walls and the ceiling: 528 sq ft, or 19 sheets of 4×8 with 10% waste.

Should I use 4×8 or 4×12 drywall?

4×12 sheets mean fewer seams on long walls; 4×8 sheets are easier to carry and fit in small rooms.

Questions answered

Related calculators