Epoxy Calculator
Test cases replayed : 3 of 3 match · Methodology · No outside source listed
Choose a rectangular or round surface, enter its size, the thickness and the mix ratio to get the resin volume.
Result
Mixed epoxy (US gallons)
Mixed epoxy (cubic inches)
- Mixed epoxy (US fluid ounces)
- Mixed epoxy (liters)
- Resin, part A (fluid ounces)
- Hardener, part B (fluid ounces)
The unit choice applies to the fields you fill in. Results stay in the units written with them.
Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.
This browser did not allow copying. The sentence is in the box below, already selected: copy it with your keyboard or the menu.
Affiliate link
This is an affiliate link. As an Amazon Associate I earn from qualifying purchases. This does not change the result.
Search Amazon for epoxy resin kits. Visit Amazon
How to use this calculator
Fill in the fields in this order; each step takes you to its field.
- Units: switches the fields between the two unit systems.
- Surface shape: choose Rectangular or Round.
- Length, rectangular, in in: enter 0 or more.
- Width, rectangular, in in: enter 0 or more.
- Diameter, round, in in: enter 0 or more.
- Pour or coat thickness, in in: enter 0 or more.
- Number of pieces or coats: enter 1 or more.
- Extra for edges and losses, in percent: enter a number from 0 to 50.
- Mix ratio, resin : hardener by volume: choose 1 : 1, 2 : 1 or 3 : 1.
- Read the result: Mixed epoxy (US gallons); the panel also shows Mixed epoxy (cubic inches), Mixed epoxy (US fluid ounces), Mixed epoxy (liters), Resin, part A (fluid ounces) and Hardener, part B (fluid ounces).
How this calculator works
Volume = surface area × thickness × pieces, plus the extra allowance. Area is length × width, or π × (diameter ÷ 2)² for a round top.
1 US gallon = 231 cubic inches = 128 fluid ounces = 3.785411784 liters. For an A:B ratio of r:1 by volume, resin = total × r ÷ (r + 1) and hardener = total ÷ (r + 1). Check the maximum pour depth on the product data sheet.
The formula
| Symbol | Meaning | Unit |
|---|---|---|
| Surface shape (1: Rectangular; 2: Round) | ||
| Length, rectangular | in | |
| Width, rectangular | in | |
| Diameter, round | in | |
| Pour or coat thickness | in | |
| Number of pieces or coats | ||
| Extra for edges and losses | % | |
| Mixed epoxy | cubic inches | |
| Mixed epoxy | US gallons |
Worked example
| Surface shape | Rectangular |
|---|---|
| Length, rectangular | 48 in |
| Width, rectangular | 24 in |
| Diameter, round | 24 in |
| Pour or coat thickness | 0.125 in |
| Number of pieces or coats | 1 |
| Extra for edges and losses | 10% |
| Mix ratio, resin : hardener by volume | 1 : 1 |
| Mixed epoxy (cubic inches) | 158.40 |
|---|---|
| Mixed epoxy (US fluid ounces) | 87.77 |
| Mixed epoxy (liters) | 2.60 |
| Resin, part A (fluid ounces) | 43.89 |
| Hardener, part B (fluid ounces) | 43.89 |
Mixed epoxy (US gallons) 0.6857
Each step uses the unrounded value of the step before it; figures on this page are rounded for display.
Frequently asked questions
How much epoxy for a 4 × 2 ft table at 1/8 inch?
48 × 24 × 0.125 = 144 cubic inches, 0.6234 gallon (79.79 fl oz) before the extra allowance.
Can I pour it all at once?
Only up to the maximum depth per pour the maker states; thicker pours are done in layers.