Skip to content
FiftyCalc Free calculators for all 50 states

Fabric Calculator

Test cases replayed : 3 of 3 match · Methodology · No outside source listed

Enter the size of one piece (seam allowances included), how many you need and the usable width of the fabric.

Result

Sample figures

Fabric to buy—yd

Pieces across the width —

  • Rows of pieces—
  • Fabric to buy (meters)—

The unit choice applies to the fields you fill in. Results stay in the units written with them.

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Fabric Calculator

Units: switches the fields between the two unit systems.

Piece width, in in: enter 0 or more. Prefilled example: 10.

Piece length, in in: enter 0 or more. Prefilled example: 12.

Number of pieces: enter 1 or more. Prefilled example: 20.

Usable fabric width (in): choose 42 in (44/45 in quilting cotton), 54 in, 58 in (60 in fabric) or 108 in (wide backing). Prefilled example: 42 in (44/45 in quilting cotton).

Extra for shrinkage and mistakes, in percent: enter 0 or more. Prefilled example: 0.

Affiliate link

This is an affiliate link. As an Amazon Associate I earn from qualifying purchases. This does not change the result.

Search Amazon for quilting fabric and sewing supplies. Visit Amazon

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Units: switches the fields between the two unit systems.
  2. Piece width, in in: enter 0 or more.
  3. Piece length, in in: enter 0 or more.
  4. Number of pieces: enter 1 or more.
  5. Usable fabric width (in): choose 42 in (44/45 in quilting cotton), 54 in, 58 in (60 in fabric) or 108 in (wide backing).
  6. Extra for shrinkage and mistakes, in percent: enter 0 or more.
  7. Read the result: Fabric to buy; the panel also shows Pieces across the width, Rows of pieces and Fabric to buy (meters).

How this calculator works

Pieces across = usable width ÷ piece width, rounded down. Rows = pieces needed ÷ pieces across, rounded up. Length = rows × piece length; yards = inches ÷ 36, plus the extra percentage. 1 yd = 0.9144 m exactly (NIST).

Selvages and shrinkage take part of the listed width, which is why 44/45-inch cotton is counted at 42 inches. Directional prints may need all pieces the same way, which this layout assumes.

The formula

  1. Per=floor⁡(fwpw)
  2. R=ceil⁡(nPer)
  3. Yd=R×pl36×(1+ex100)
Symbols used in the formula
SymbolMeaningUnit
pwPiece widthin
plPiece lengthin
nNumber of pieces
fwUsable fabric widthin
exExtra for shrinkage and mistakes%
PerPieces across the width
RRows of pieces
YdFabric to buyyd
floor(x)the largest whole number not above x.
ceil(x)the smallest whole number not below x.

Worked example

Piece width10 in
Piece length12 in
Number of pieces20
Usable fabric width (in)42 in (44/45 in quilting cotton)
Extra for shrinkage and mistakes0%
Pieces across the width4
Rows of pieces5
Fabric to buy (meters)1.52
  1. Per=floor⁡(4210)=4
  2. R=ceil⁡(204)=5
  3. Yd=5×1236×(1+0100)=1.66667

Fabric to buy 1.67 yd

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How much fabric for 20 pieces of 10 × 12 inches on 44-inch cotton?

4 pieces fit across 42 usable inches, so 5 rows of 12 inches: 60 inches, or 1.67 yards (1.52 m).

Why add extra?

To allow for shrinking when prewashed, straightening the cut edge and the odd mistake; 10% is a common margin.

Related calculators