Skip to content
FiftyCalc Free calculators for all 50 states

Footing Calculator

Test cases replayed : 3 of 3 match · Methodology · Sources

Enter the load each foot of wall puts on the footing, the soil type, the footing length and its thickness to get the minimum width and the concrete to order.

Result

Sample figures

Footing width to use (in, at least 12)—

Width needed for the soil (in) —

  • Concrete (cubic feet)—
  • Concrete (cubic yards)—
  • Thickness check—

Estimate for planning only, not tax, legal, financial or medical advice. Check important figures with the official source listed on this page.

Footing Calculator

Load on the footing (pounds per linear foot of wall): enter 0 or more. Prefilled example: 2,500.

Soil class (presumptive load-bearing value): choose Clay, sandy clay, silty clay, clayey silt, silt, sandy silt (CL, ML, MH, CH): 1,500 psf, Sand, silty sand, clayey sand, silty gravel, clayey gravel (SW, SP, SM, SC, GM, GC): 2,000 psf, Sandy gravel or gravel (GW, GP): 3,000 psf, Sedimentary and foliated rock: 4,000 psf or Crystalline bedrock: 12,000 psf. Prefilled example: Clay, sandy clay, silty clay, clayey silt, silt, sandy silt (CL, ML, MH, CH): 1,500 psf.

Total footing length, in ft: enter 0 or more. Prefilled example: 120.

Footing thickness, in in: enter 0 or more. Prefilled example: 8.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Load on the footing (pounds per linear foot of wall): enter 0 or more.
  2. Soil class (presumptive load-bearing value): choose Clay, sandy clay, silty clay, clayey silt, silt, sandy silt (CL, ML, MH, CH): 1,500 psf, Sand, silty sand, clayey sand, silty gravel, clayey gravel (SW, SP, SM, SC, GM, GC): 2,000 psf, Sandy gravel or gravel (GW, GP): 3,000 psf, Sedimentary and foliated rock: 4,000 psf or Crystalline bedrock: 12,000 psf.
  3. Total footing length, in ft: enter 0 or more.
  4. Footing thickness, in in: enter 0 or more.
  5. Read the result: Footing width to use (in, at least 12); the panel also shows Width needed for the soil (in), Concrete (cubic feet), Concrete (cubic yards) and Thickness check.

Sources

How this calculator works

Soil values are the presumptive load-bearing values of Table R401.4.1 of the International Residential Code (2021 edition, as adopted in the 2021 Seattle Residential Code, read October 28, 2026): 1,500, 2,000, 3,000, 4,000 and 12,000 pounds per square foot. Where the building official expects soil weaker than 1,500 psf, a soils investigation sets the value.

A footing spreads the wall load over the soil: required width (ft) = load per linear foot ÷ allowable soil pressure (psf), shown here in inches and rounded up to the next whole inch. IRC section R403.1.1 sets a minimum of 12 inches wide and 6 inches deep and bases the width on the soil's load-bearing value.

Concrete volume = length × width × thickness, in cubic feet, ÷ 27 for cubic yards. The IRC prescriptive tables R403.1(1) to R403.1(3) give widths by number of stories and wall type, and your local code or engineer governs; add a margin for uneven trenches when ordering.

The formula

  1. Req=ls×12
  2. W=max⁡(12,ceil⁡(Req))
Symbols used in the formula
SymbolMeaningUnit
lLoad on the footing (pounds per linear foot of wall)
sSoil class (presumptive load-bearing value)
ReqWidth needed for the soilin
WFooting width to use (at least 12)in
max(a, b, …)the largest of the values.
ceil(x)the smallest whole number not below x.

Worked example

Load on the footing (pounds per linear foot of wall)2,500
Soil class (presumptive load-bearing value)Clay, sandy clay, silty clay, clayey silt, silt, sandy silt (CL, ML, MH, CH): 1,500 psf
Total footing length120 ft
Footing thickness8 in
Width needed for the soil (in)20.0
Concrete (cubic feet)133.3
Concrete (cubic yards)4.94
Thickness checkMeets the 6-inch minimum
  1. Req=2,5001,500×12=20
  2. W=max⁡(12,ceil⁡(20))=20

Footing width to use (in, at least 12) 20

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How wide should a footing be on clay?

At 1,500 psf, a load of 2,500 lb per foot needs 2,500 ÷ 1,500 = 1.67 ft, so 20 in after rounding up.

How much concrete is a 120 ft footing 20 in wide and 8 in thick?

120 × 20/12 × 8/12 = 133.3 cubic feet, about 4.94 cubic yards.

Where do I get the load per foot?

From the house plans or the designer: it adds the roof, floors, walls, snow and live loads carried by that wall. Do not guess it for a permit.

Questions answered

Related calculators