Skip to content
FiftyCalc Free calculators for all 50 states

French Drain Calculator

Test cases replayed : 2 of 2 match · Methodology · Sources

Enter the trench size and the pipe diameter to get the gravel to order and the filter fabric that wraps the trench.

Result

Sample figures

Gravel—cu yd

Trench volume (cubic feet) —

  • Space taken by the pipe (cubic feet)—
  • Gravel (cubic feet)—
  • Gravel (tons)—
  • Filter fabric lining the trench (square feet)—

Estimate for planning only, not tax, legal, financial or medical advice. Check important figures with the official source listed on this page.

French Drain Calculator

Trench length, in ft: enter 0 or more. Prefilled example: 50.

Trench width, in in: enter 0 or more. Prefilled example: 12.

Trench depth, in in: enter 0 or more. Prefilled example: 18.

Perforated pipe outside diameter, in in: enter 0 or more. Prefilled example: 4.

Gravel bulk density (lb per cubic foot, from your supplier; 100 is only an example): enter 0 or more. Prefilled example: 100.

Fabric overlap at the top, in in: enter 0 or more. Prefilled example: 12.

Affiliate link

This is an affiliate link. As an Amazon Associate I earn from qualifying purchases. This does not change the result.

Search Amazon for measuring wheels. Visit Amazon

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Trench length, in ft: enter 0 or more.
  2. Trench width, in in: enter 0 or more.
  3. Trench depth, in in: enter 0 or more.
  4. Perforated pipe outside diameter, in in: enter 0 or more.
  5. Gravel bulk density (lb per cubic foot, from your supplier; 100 is only an example): enter 0 or more.
  6. Fabric overlap at the top, in in: enter 0 or more.
  7. Read the result: Gravel; the panel also shows Trench volume (cubic feet), Space taken by the pipe (cubic feet), Gravel (cubic feet), Gravel (tons) and Filter fabric lining the trench (square feet).

Sources

How this calculator works

Gravel = trench length × width × depth − pipe volume (π × (diameter ÷ 2)² × length). Cubic yards = cubic feet ÷ 27; tons = cubic feet × bulk density ÷ 2,000.

Fabric width = both sides + bottom + top of the trench (2 × depth + 2 × width) plus the overlap, times the trench length. Pipe length equals the trench length. Unit factors from NIST Handbook 44 (2026), Appendix C, General Tables of Units of Measurement (https://www.nist.gov/document/2026-nist-handbook-44-appendix-c), read on 2026-10-27: 1 inch = 2.54 cm exactly, 1 cubic foot = 1,728 cubic inches, 1 gallon = 231 cubic inches = 3.785411784 L, 1 cubic yard = 27 cubic feet, 1 pound = 0.45359237 kg, 1 ton = 2,000 pounds.

The formula

  1. Tr=L×W÷12×D12
  2. Pp=π×(d2÷24)2×L
  3. G=Tr−Pp
  4. Yd=G27
Symbols used in the formula
SymbolMeaningUnit
LTrench lengthft
WTrench widthin
DTrench depthin
d2Perforated pipe outside diameterin
TrTrench volumecubic feet
PpSpace taken by the pipecubic feet
GGravelcubic feet
YdGravelcu yd

Worked example

Trench length50 ft
Trench width12 in
Trench depth18 in
Perforated pipe outside diameter4 in
Gravel bulk density (lb per cubic foot, from your supplier; 100 is only an example)100
Fabric overlap at the top12 in
Trench volume (cubic feet)75
Space taken by the pipe (cubic feet)4.3633
Gravel (cubic feet)70.6367
Gravel (tons)3.53
Filter fabric lining the trench (square feet)300.0
  1. Tr=50×12÷12×1812=75
  2. Pp=3.14159×(4÷24)2×50=4.36332
  3. G=75−4.36332=70.6367
  4. Yd=70.636727=2.61617

Gravel 2.62 cu yd

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How much gravel for a 50-foot French drain 12 inches wide and 18 inches deep?

The trench holds 75 cubic feet; a 4-inch pipe takes about 4.36, leaving about 70.64 cubic feet, or 2.62 cubic yards.

Why ask for the gravel density?

Washed drain rock weighs differently by size and stone type; suppliers sell by the ton, so use their figure to convert.

Questions answered

Related calculators