Grout Calculator
Test cases replayed : 2 of 2 match · Methodology · Sources
Enter the tile size, the joint width and depth (usually the tile thickness) and the area to tile.
Result
Grout neededlb
Grout volume with waste (cubic inches)
Reading the result
At a glance
What moves the result
Method and sources: How this calculator works, Sources
- Bags to buy
Estimate for planning only, not tax, legal, financial or medical advice. Check important figures with the official source listed on this page.
This browser did not allow copying. The sentence is in the box below, already selected: copy it with your keyboard or the menu.
Affiliate link
This is an affiliate link. As an Amazon Associate I earn from qualifying purchases. This does not change the result.
Search Amazon for tile grout and grout tools. Visit Amazon
How to use this calculator
Fill in the fields in this order; each step takes you to its field.
- Tile length, in in: enter 0.01 or more.
- Tile width, in in: enter 0.01 or more.
- Joint width (1/8 = 0.125), in in: enter 0 or more.
- Joint depth, usually the tile thickness, in in: enter 0 or more.
- Area to tile, in sq ft: enter 0 or more.
- Waste allowance, in percent: enter a number from 0 to 100.
- Grout density (g/cm³, from the product data sheet; 1.6 is only an example): enter 0 or more.
- Bag size, in lb: enter 0.1 or more.
- Read the result: Grout needed; the panel also shows Grout volume with waste (cubic inches) and Bags to buy.
Sources
- NIST Handbook 44 (2026), Appendix C, General Tables of Units of Measurement National Institute of Standards and Technology (NIST) checked on 2026-11-01
How this calculator works
Joint volume per unit of floor = (tile length + tile width) ÷ (tile length × tile width) × joint width × joint depth. Multiplied by the area (in square inches) it gives the cubic inches of grout; × density gives the weight.
Density conversion: 1 g/cm³ = 16.387064 ÷ 453.59237 = 0.036127292 lb per cubic inch. Unit factors from NIST Handbook 44 (2026), Appendix C, General Tables of Units of Measurement (https://www.nist.gov/document/2026-nist-handbook-44-appendix-c), read on 2026-10-27: 1 inch = 2.54 cm exactly, 1 cubic foot = 1,728 cubic inches, 1 gallon = 231 cubic inches = 3.785411784 L, 1 cubic yard = 27 cubic feet, 1 pound = 0.45359237 kg, 1 ton = 2,000 pounds. Grout makers publish their product's density or coverage on the data sheet; use it in place of the example.
The formula
| Symbol | Meaning | Unit |
|---|---|---|
| Tile length | in | |
| Tile width | in | |
| Joint width (1/8 = 0.125) | in | |
| Joint depth, usually the tile thickness | in | |
| Area to tile | sq ft | |
| Waste allowance | % | |
| Grout density (from the product data sheet, 1.6 is only an example) | g/cm³ | |
| Grout volume with waste | cubic inches | |
| Grout needed | lb |
Worked example
| Tile length | 12 in |
|---|---|
| Tile width | 12 in |
| Joint width (1/8 = 0.125) | 0.125 in |
| Joint depth, usually the tile thickness | 0.375 in |
| Area to tile | 100 sq ft |
| Waste allowance | 10% |
| Grout density (g/cm³, from the product data sheet; 1.6 is only an example) | 1.6 |
| Bag size | 25 lb |
| Grout volume with waste (cubic inches) | 123.75 |
|---|---|
| Bags to buy | 1 |
Grout needed 7.2 lb
Each step uses the unrounded value of the step before it; figures on this page are rounded for display.
Frequently asked questions
How much grout for 100 square feet of 12-inch tile with 1/8-inch joints?
With 3/8-inch deep joints and 10% waste: 14,400 × 2/12 × 0.125 × 0.375 × 1.1 = 123.75 cubic inches, about 7.2 pounds at 1.6 g/cm³.
Why do small tiles need more grout?
There are more joints per square foot: the (L + W) ÷ (L × W) factor grows as tiles shrink.