Heat Transfer Calculator
Test cases replayed : 2 of 2 match · Methodology · No outside source listed
Enter the thermal conductivity of the material, the area, the thickness and the temperatures on each side.
Result
Heat flow (W)
Heat flow (BTU/h)
- Heat flux (W/m²)
- Thermal resistance of the layer (m²·K/W)
Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.
This browser did not allow copying. The sentence is in the box below, already selected: copy it with your keyboard or the menu.
How to use this calculator
Fill in the fields in this order; each step takes you to its field.
- Thermal conductivity k (W/(m·K)): enter 0 or more.
- Area, in m²: enter 0 or more.
- Thickness, in mm: enter 0 or more.
- Warm-side temperature, in °C: enter a number.
- Cold-side temperature, in °C: enter a number.
- Read the result: Heat flow (W); the panel also shows Heat flow (BTU/h), Heat flux (W/m²) and Thermal resistance of the layer (m²·K/W).
How this calculator works
Fourier's law for steady one-dimensional conduction: Q̇ = k A (T_hot − T_cold) ÷ d, with k the thermal conductivity, A the area and d the thickness. The layer's thermal resistance per unit area is d ÷ k.
1 BTU/h = 0.2930711 W (NIST Special Publication 811, Appendix B.9 (https://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9, read 2026-10-27)). Surface films and convection are not included; use our heat transfer coefficient calculator for a full wall.
The formula
| Symbol | Meaning | Unit |
|---|---|---|
| Thermal conductivity k (W/(m·K)) | ||
| Area | m² | |
| Thickness | mm | |
| Warm-side temperature | °C | |
| Cold-side temperature | °C | |
| Heat flow | W |
Worked example
| Thermal conductivity k (W/(m·K)) | 0.04 |
|---|---|
| Area | 10 m² |
| Thickness | 100 mm |
| Warm-side temperature | 20 °C |
| Cold-side temperature | 0 °C |
| Heat flow (BTU/h) | 273 |
|---|---|
| Heat flux (W/m²) | 8 |
| Thermal resistance of the layer (m²·K/W) | 2.5 |
Heat flow (W) 80
Each step uses the unrounded value of the step before it; figures on this page are rounded for display.
Frequently asked questions
How much heat passes through 10 m² of 100 mm insulation (k = 0.04) with a 20 K difference?
80 W, about 273 BTU/h.
What does doubling the thickness do?
It halves the heat flow, because conduction is inversely proportional to thickness.