Skip to content
FiftyCalc Free calculators for all 50 states

Hoop House Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the width, length and hoop spacing of a half-circle hoop house, and the extra plastic you want on each edge to bury or fasten.

Result

Sample figures

Plastic cover width—ft

Length of one hoop (feet) —

  • Center height (feet)—
  • Number of hoops—
  • Total hoop tubing (feet)—
  • Plastic cover length, ends included (feet)—
  • Floor area (square feet)—

The unit choice applies to the fields you fill in. Results stay in the units written with them.

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Hoop House Calculator

Units: switches the fields between the two unit systems.

Width, in ft: enter 0 or more. Prefilled example: 12.

Length, in ft: enter 0 or more. Prefilled example: 24.

Hoop spacing, in ft: enter 0.1 or more. Prefilled example: 4.

Extra cover on each edge, in ft: enter 0 or more. Prefilled example: 4.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Units: switches the fields between the two unit systems.
  2. Width, in ft: enter 0 or more.
  3. Length, in ft: enter 0 or more.
  4. Hoop spacing, in ft: enter 0.1 or more.
  5. Extra cover on each edge, in ft: enter 0 or more.
  6. Read the result: Plastic cover width; the panel also shows Length of one hoop (feet), Center height (feet), Number of hoops, Total hoop tubing (feet), Plastic cover length, ends included (feet) and Floor area (square feet).

How this calculator works

A half-circle hoop of width W has radius W ÷ 2, so its arc is π × W ÷ 2 and the center height is W ÷ 2. Hoops = length ÷ spacing, rounded down, + 1 (one at each end).

Cover width = hoop arc + extra on both edges. Cover length = house length + two end heights (W ÷ 2 each, to drape the end walls) + extra on both ends. Gothic or low-tunnel shapes differ; measure one hoop for them.

The formula

  1. Hl=π×W2
  2. Cw=Hl+2×x
Symbols used in the formula
SymbolMeaningUnit
WWidthft
xExtra cover on each edgeft
HlLength of one hoopfeet
CwPlastic cover widthft

Worked example

Width12 ft
Length24 ft
Hoop spacing4 ft
Extra cover on each edge4 ft
Length of one hoop (feet)18.8496
Center height (feet)6
Number of hoops7
Total hoop tubing (feet)131.9
Plastic cover length, ends included (feet)44.0
Floor area (square feet)288
  1. Hl=3.14159×122=18.8496
  2. Cw=18.8496+2×4=26.8496

Plastic cover width 26.8 ft

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How long is each hoop for a 12-foot wide hoop house?

π × 12 ÷ 2 ≈ 18.85 feet for a half circle, 6 feet high at the center.

How many hoops for a 24-foot house at 4-foot spacing?

24 ÷ 4 + 1 = 7 hoops.

Questions answered

Related calculators