Skip to content
FiftyCalc Free calculators for all 50 states

Hydraulic Conductivity Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the flow through the sample, its length and cross-section area, and the head difference across it.

Result

Sample figures

Hydraulic conductivity K—cm/s

Hydraulic conductivity (m/day) —

  • Hydraulic conductivity (ft/day)—
  • Hydraulic gradient Δh ÷ L—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Hydraulic Conductivity Calculator

Flow rate (cm³ per second): enter 0 or more. Prefilled example: 2.

Sample length, in cm: enter 0 or more. Prefilled example: 20.

Cross-section area, in cm²: enter 0 or more. Prefilled example: 80.

Head difference, in cm: enter 0 or more. Prefilled example: 50.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Flow rate (cm³ per second): enter 0 or more.
  2. Sample length, in cm: enter 0 or more.
  3. Cross-section area, in cm²: enter 0 or more.
  4. Head difference, in cm: enter 0 or more.
  5. Read the result: Hydraulic conductivity K; the panel also shows Hydraulic conductivity (m/day), Hydraulic conductivity (ft/day) and Hydraulic gradient Δh ÷ L.

How this calculator works

Constant-head permeameter, Darcy's law: Q = K A (Δh ÷ L), so K = Q L ÷ (A Δh), with Q the flow, L the sample length, A its area and Δh the head difference.

1 ft = 30.48 cm (NIST Special Publication 811, Appendix B.9 (https://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9, read 2026-10-27)); 1 day = 86,400 s. Darcy's law holds for slow, laminar flow through the pores.

The formula

  1. K=Q×LA×dh
Symbols used in the formula
SymbolMeaningUnit
QFlow ratecm³ per second
LSample lengthcm
ACross-section areacm²
dhHead differencecm
KHydraulic conductivity Kcm/s

Worked example

Flow rate (cm³ per second)2
Sample length20 cm
Cross-section area80 cm²
Head difference50 cm
Hydraulic conductivity (m/day)8.64
Hydraulic conductivity (ft/day)28.3465
Hydraulic gradient Δh ÷ L2.5
  1. K=2×2080×50=0.01

Hydraulic conductivity K 0.01 cm/s

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

A 20 cm sample of 80 cm² passes 2 cm³/s under 50 cm of head. What is K?

0.01 cm/s, which is 8.64 m/day (about 28.35 ft/day).

Is K the same as permeability?

Not exactly. K depends on the fluid as well; intrinsic permeability is a property of the porous material alone.

Related calculators