Skip to content
FiftyCalc Free calculators for all 50 states

Hydraulic Pressure Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Choose what to find, then enter the cylinder bore and either the force or the pressure.

Result

Sample figures

Answer (psi or lbf)—

Piston area (in²) —

  • Pressure (psi)—
  • Force (lbf)—
  • Pressure (bar)—
  • Force (kN)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Hydraulic Pressure Calculator

Find: choose Pressure needed for a force or Force at a pressure. Prefilled example: Pressure needed for a force.

Bore diameter, in in: enter 0 or more. Prefilled example: 3.

Force (lbf): enter 0 or more. Prefilled example: 10,000.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Find: choose Pressure needed for a force or Force at a pressure.
  2. Bore diameter, in in: enter 0 or more.
  3. Force (lbf): enter 0 or more.
  4. Pressure, in psi: enter 0 or more.
  5. Read the result: Answer (psi or lbf); the panel also shows Piston area (in²), Pressure (psi), Force (lbf), Pressure (bar) and Force (kN).

How this calculator works

Pascal's principle: pressure p = F ÷ A, with A = π d² ÷ 4 the piston area for a bore diameter d. So the force is F = p × A.

1 psi = 6.894757 kPa (1 bar = 100 kPa) and 1 lbf = 4.448222 N (NIST Special Publication 811, Appendix B.9 (https://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9, read 2026-10-27)). On the retract stroke subtract the rod area; friction and seals reduce the real force a little.

The formula

  1. A=π4×d2
  2. Po={FAif m=1potherwise
  3. Fo={p×Aif m=2Fotherwise
  4. Ans={Poif m=1Footherwise
Symbols used in the formula
SymbolMeaningUnit
mFind (1: Pressure needed for a force; 2: Force at a pressure)
dBore diameterin
FForcelbf
pPressurepsi
APiston areain²
PoPressurepsi
FoForcelbf
AnsAnswerpsi or lbf

Worked example

FindPressure needed for a force
Bore diameter3 in
Force (lbf)10,000
Piston area (in²)7.0686
Pressure (psi)1,415
Force (lbf)10,000
Pressure (bar)97.5
Force (kN)44.48
  1. A=3.141594×32=7.06858
  2. Po=10,0007.06858=1,414.71
  3. Fo=10,000
  4. Ans=1,414.71

Answer (psi or lbf) 1,415

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What pressure lets a 3-inch bore cylinder push 10,000 lbf?

About 1,415 psi (piston area 7.07 in²).

What force does it push at 2,000 psi?

About 14,137 lbf, or 62.89 kN.

Related calculators