Skip to content
FiftyCalc Free calculators for all 50 states

Hydraulic Radius Calculator

Test cases replayed : 3 of 3 match · Methodology · No outside source listed

Choose the section, then enter its dimensions in the same unit.

Result

Sample figures

Hydraulic radius A ÷ P (unit)—

Flow area (unit²) —

  • Wetted perimeter (unit)—
  • Hydraulic diameter 4R (unit)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Hydraulic Radius Calculator

Section: choose Rectangular or trapezoidal channel or Circular pipe flowing full. Prefilled example: Rectangular or trapezoidal channel.

Bottom width (channel): enter 0 or more. Prefilled example: 3.

Flow depth (channel): enter 0 or more. Prefilled example: 1.5.

Side slope, horizontal per 1 vertical (0 = rectangle): enter 0 or more. Prefilled example: 0.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Section: choose Rectangular or trapezoidal channel or Circular pipe flowing full.
  2. Bottom width (channel): enter 0 or more.
  3. Flow depth (channel): enter 0 or more.
  4. Side slope, horizontal per 1 vertical (0 = rectangle): enter 0 or more.
  5. Pipe inside diameter (pipe): enter 0 or more.
  6. Read the result: Hydraulic radius A ÷ P (unit); the panel also shows Flow area (unit²), Wetted perimeter (unit) and Hydraulic diameter 4R (unit).

How this calculator works

Hydraulic radius R = A ÷ P, the flow area divided by the wetted perimeter. Trapezoid with bottom width b, depth y and side slope z: A = (b + z y) y and P = b + 2y √(1 + z²); z = 0 gives a rectangle. A full circular pipe gives R = D ÷ 4.

R is the length used in Manning's equation; the hydraulic diameter 4R is used in the Reynolds number and Darcy–Weisbach equation for non-circular ducts.

The formula

  1. A={(b+z×y)×yif sh=1π4×D2otherwise
  2. P={b+2×y×1+z2if sh=1π×Dotherwise
  3. R=AP
Symbols used in the formula
SymbolMeaningUnit
shSection (1: Rectangular or trapezoidal channel; 2: Circular pipe flowing full)
bBottom width (channel)
yFlow depth (channel)
zSide slope, horizontal per 1 vertical (0 = rectangle)
DPipe inside diameter (pipe)
AFlow areaunit²
PWetted perimeterunit
RHydraulic radius A ÷ Punit

Worked example

SectionRectangular or trapezoidal channel
Bottom width (channel)3
Flow depth (channel)1.5
Side slope, horizontal per 1 vertical (0 = rectangle)0
Flow area (unit²)4.5
Wetted perimeter (unit)6
Hydraulic diameter 4R (unit)3
  1. A=(3+0×1.5)×1.5=4.5
  2. P=3+2×1.5×1+02=6
  3. R=4.56=0.75

Hydraulic radius A ÷ P (unit) 0.75

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What is the hydraulic radius of a 3 ft wide rectangular channel flowing 1.5 ft deep?

0.75 ft: area 4.5 ft² over a wetted perimeter of 6 ft.

What is it for a full 1 ft pipe?

0.25 ft, a quarter of the diameter.

Related calculators