Skip to content
FiftyCalc Free calculators for all 50 states

Isentropic Flow Calculator

Test cases replayed : 3 of 3 match · Methodology · No outside source listed

Find the temperature, pressure, density and area ratios of a compressible isentropic flow at a given Mach number.

Result

Sample figures

Pressure ratio p ÷ p₀—

Temperature ratio T ÷ T₀ —

  • Density ratio ρ ÷ ρ₀—
  • Area ratio A ÷ A*—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Isentropic Flow Calculator

Mach number M: enter 0.0001 or more. Prefilled example: 2.

Ratio of specific heats γ: enter 1.0001 or more. Prefilled example: 1.4.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Mach number M: enter 0.0001 or more.
  2. Ratio of specific heats γ: enter 1.0001 or more.
  3. Read the result: Pressure ratio p ÷ p₀; the panel also shows Temperature ratio T ÷ T₀, Density ratio ρ ÷ ρ₀ and Area ratio A ÷ A*.

How this calculator works

Isentropic relations for a perfect gas, with T₀, p₀ and ρ₀ the stagnation (total) values: T ÷ T₀ = [1 + (γ − 1)/2 × M²]⁻¹, p ÷ p₀ = (T ÷ T₀)^(γ/(γ−1)), ρ ÷ ρ₀ = (T ÷ T₀)^(1/(γ−1)).

Area ratio to the sonic throat: A ÷ A* = (1/M) × [(2/(γ + 1)) × (1 + (γ − 1)/2 × M²)]^((γ+1)/(2(γ−1))). These are the relations in NASA Glenn Research Center's Beginner's Guide to Aeronautics, isentropic flow page (grc.nasa.gov/www/k-12/airplane/isentrop.html, read October 27, 2026).

The default γ = 1.4 is an example for air at moderate temperatures; enter the value for your gas.

The formula

  1. Tt=11+(g−1)÷2×m2
  2. Pp=Ttg÷(g−1)
Symbols used in the formula
SymbolMeaning
mMach number M
gRatio of specific heats γ
TtTemperature ratio T ÷ T₀
PpPressure ratio p ÷ p₀

Worked example

Mach number M2
Ratio of specific heats γ1.4
Temperature ratio T ÷ T₀0.5556
Density ratio ρ ÷ ρ₀0.23
Area ratio A ÷ A*1.6875
  1. Tt=11+(1.4−1)÷2×22=0.555556
  2. Pp=0.5555561.4÷(1.4−1)=0.127805

Pressure ratio p ÷ p₀ 0.1278

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What does A/A* mean?

The ratio of the duct area to the throat area where the flow would be exactly sonic; it is 1 at Mach 1 and larger both below and above Mach 1.

What is the pressure ratio at Mach 1 in air?

About 0.5283 for γ = 1.4, the critical pressure ratio.

Related calculators