Skip to content
FiftyCalc Free calculators for all 50 states

LMTD Calculator

Test cases replayed : 3 of 3 match · Methodology · No outside source listed

Find the log mean temperature difference that drives heat transfer in a heat exchanger.

Result

Sample figures

LMTD—°

ΔT₁ (degrees) —

  • ΔT₂ (degrees)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

LMTD Calculator

Flow arrangement

Flow arrangement: choose Counterflow or Parallel flow. Prefilled example: Counterflow.

Hot fluid inlet (°F or °C): enter a number. Prefilled example: 200.

Hot fluid outlet: enter a number. Prefilled example: 140.

Cold fluid inlet: enter a number. Prefilled example: 60.

Cold fluid outlet: enter a number. Prefilled example: 110.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Flow arrangement: choose Counterflow or Parallel flow.
  2. Hot fluid inlet (°F or °C): enter a number.
  3. Hot fluid outlet: enter a number.
  4. Cold fluid inlet: enter a number.
  5. Cold fluid outlet: enter a number.
  6. Read the result: LMTD; the panel also shows ΔT₁ (degrees) and ΔT₂ (degrees).

How this calculator works

LMTD = (ΔT₁ − ΔT₂) ÷ ln(ΔT₁ ÷ ΔT₂). In counterflow ΔT₁ = T_hot,in − T_cold,out and ΔT₂ = T_hot,out − T_cold,in; in parallel flow ΔT₁ = T_hot,in − T_cold,in and ΔT₂ = T_hot,out − T_cold,out. When the two differences are equal, LMTD equals that difference.

The heat duty is then Q = U × A × LMTD (times a correction factor F for multipass and crossflow exchangers). Use one temperature scale throughout; the result is a temperature difference in the same degrees.

The formula

  1. D1={thi−tcoif f=1thi−tciotherwise
  2. D2={tho−tciif f=1tho−tcootherwise
  3. Lm={D1if D1=D2D1−D2ln⁡(D1D2)otherwise
Symbols used in the formula
SymbolMeaningUnit
fFlow arrangement (1: Counterflow; 2: Parallel flow)
thiHot fluid inlet°F or °C
thoHot fluid outlet
tciCold fluid inlet
tcoCold fluid outlet
D1ΔT₁degrees
D2ΔT₂degrees
LmLMTD°

Worked example

Flow arrangementCounterflow
Hot fluid inlet (°F or °C)200
Hot fluid outlet140
Cold fluid inlet60
Cold fluid outlet110
ΔT₁ (degrees)90
ΔT₂ (degrees)80
  1. D1=200−110=90
  2. D2=140−60=80
  3. Lm=90−80ln⁡(9080)=84.9019

LMTD 84.9019 °

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

Why not use the plain average temperature difference?

The difference changes along the exchanger in an exponential way; the log mean is the exact average for constant U and specific heats.

Why is counterflow better?

For the same temperatures it gives a larger LMTD, so it needs less area, and the cold outlet can get hotter than the hot outlet.

Related calculators