Skip to content
FiftyCalc Free calculators for all 50 states

Log Weight Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Measure both end diameters inside the bark and the log length, then enter the density of the wood at its moisture.

Result

Sample figures

Log weight—lb

Log volume (cubic feet) —

  • Log weight (tons)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Log Weight Calculator

Log length, in ft: enter 0 or more. Prefilled example: 16.

Small-end diameter, in in: enter 0 or more. Prefilled example: 12.

Large-end diameter, in in: enter 0 or more. Prefilled example: 14.

Wood density (lb per cubic foot, green or dry; 50 is only an example): enter 0 or more. Prefilled example: 50.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Log length, in ft: enter 0 or more.
  2. Small-end diameter, in in: enter 0 or more.
  3. Large-end diameter, in in: enter 0 or more.
  4. Wood density (lb per cubic foot, green or dry; 50 is only an example): enter 0 or more.
  5. Read the result: Log weight; the panel also shows Log volume (cubic feet) and Log weight (tons).

How this calculator works

Smalian's formula: volume = (area of small end + area of large end) ÷ 2 × length, with each end area = π × diameter² ÷ 4 (÷ 144 to turn square inches into square feet). Weight = volume × density.

Wood density depends on the species and above all on moisture: freshly cut (green) wood can weigh half again as much as dry wood. The USDA Forest Products Laboratory Wood Handbook gives specific gravity by species; enter the density that matches your log.

The formula

  1. Vol=π×d12÷4÷144+π×d22÷4÷1442×L
  2. Lb=Vol×ρ
Symbols used in the formula
SymbolMeaningUnit
LLog lengthft
d1Small-end diameterin
d2Large-end diameterin
ρWood density (lb per cubic foot, green or dry; 50 is only an example)
VolLog volumecubic feet
LbLog weightlb

Worked example

Log length16 ft
Small-end diameter12 in
Large-end diameter14 in
Wood density (lb per cubic foot, green or dry; 50 is only an example)50
Log volume (cubic feet)14.84
Log weight (tons)0.37
  1. Vol=3.14159×122÷4÷144+3.14159×142÷4÷1442×16=14.8353
  2. Lb=14.8353×50=741.765

Log weight 742 lb

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How much does a 16-foot log 12 to 14 inches across weigh?

Smalian's volume is about 14.84 cubic feet; at an example 50 lb per cubic foot, about 742 pounds.

Is this the same as board feet?

No: board-foot log rules estimate sawn lumber and leave out slabs and kerf; weight uses the full log volume.

Questions answered

Related calculators