Skip to content
FiftyCalc Free calculators for all 50 states

Lumber Weight Calculator

Test cases replayed : 2 of 2 match · Methodology · Sources

Enter the actual (dressed) size of the boards, not the nominal one: a 2×4 is 1.5 × 3.5 inches.

Result

Sample figures

Weight—lb

Wood volume (cubic feet) —

  • Board feet (actual size)—
  • Weight (kilograms)—

Estimate for planning only, not tax, legal, financial or medical advice. Check important figures with the official source listed on this page.

Lumber Weight Calculator

Actual thickness, in in: enter 0 or more. Prefilled example: 1.5.

Actual width, in in: enter 0 or more. Prefilled example: 3.5.

Length, in ft: enter 0 or more. Prefilled example: 8.

Number of pieces: enter 1 or more. Prefilled example: 10.

Wood density (lb per cubic foot, at its moisture; 35 is only an example): enter 0 or more. Prefilled example: 35.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Actual thickness, in in: enter 0 or more.
  2. Actual width, in in: enter 0 or more.
  3. Length, in ft: enter 0 or more.
  4. Number of pieces: enter 1 or more.
  5. Wood density (lb per cubic foot, at its moisture; 35 is only an example): enter 0 or more.
  6. Read the result: Weight; the panel also shows Wood volume (cubic feet), Board feet (actual size) and Weight (kilograms).

Sources

How this calculator works

Volume (cubic feet) = thickness × width × length × 12 ÷ 1,728, with thickness and width in inches and length in feet. Weight = volume × density. A board foot is 144 cubic inches (1 × 12 × 12 inches).

Density varies by species and moisture; kiln-dried softwood framing is lighter than green or treated lumber. Enter the value for your wood. Unit factors from NIST Handbook 44 (2026), Appendix C, General Tables of Units of Measurement (https://www.nist.gov/document/2026-nist-handbook-44-appendix-c), read on 2026-10-27: 1 inch = 2.54 cm exactly, 1 cubic foot = 1,728 cubic inches, 1 gallon = 231 cubic inches = 3.785411784 L, 1 cubic yard = 27 cubic feet, 1 pound = 0.45359237 kg, 1 ton = 2,000 pounds.

The formula

  1. Vol=t×w×L×121,728×n
  2. Lb=Vol×ρ
Symbols used in the formula
SymbolMeaningUnit
tActual thicknessin
wActual widthin
LLengthft
nNumber of pieces
ρWood density (lb per cubic foot, at its moisture; 35 is only an example)
VolWood volumecubic feet
LbWeightlb

Worked example

Actual thickness1.5 in
Actual width3.5 in
Length8 ft
Number of pieces10
Wood density (lb per cubic foot, at its moisture; 35 is only an example)35
Wood volume (cubic feet)2.92
Board feet (actual size)35.00
Weight (kilograms)46.3
  1. Vol=1.5×3.5×8×121,728×10=2.91667
  2. Lb=2.91667×35=102.083

Weight 102.1 lb

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How much do ten 8-foot 2×4s weigh?

1.5 × 3.5 × 96 = 504 cubic inches each, 2.92 cubic feet for ten; at an example 35 lb per cubic foot, about 102.1 pounds.

Why use actual sizes?

Nominal sizes (2×4) are the rough-sawn size; planed lumber is smaller (1.5 × 3.5), and weight follows the real wood.

Questions answered

Related calculators