Skip to content
FiftyCalc Free calculators for all 50 states

Mortar Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the wall size, the size of your bricks or blocks and the joint thickness to get the mortar volume and the bags to buy.

Result

Sample figures

Bags of mortar mix—

Units per square foot of wall —

  • Bricks or blocks in the wall—
  • Mortar with waste (cubic feet)—

The unit choice applies to the fields you fill in. Results stay in the units written with them.

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Mortar Calculator

Units: switches the fields between the two unit systems.

Wall length, in ft: enter 0 or more. Prefilled example: 20.

Wall height, in ft: enter 0 or more. Prefilled example: 4.

Unit length, actual (example value; measure your brick or block), in in: enter 0.5 or more. Prefilled example: 7.625.

Unit height, actual (example value; measure your brick or block), in in: enter 0.5 or more. Prefilled example: 2.25.

Mortar bed width (example value; depth of mortar under each unit), in in: enter 0.1 or more. Prefilled example: 3.625.

Joint thickness, in in: enter a number from 0 to 1. Prefilled example: 0.375.

Waste allowance, in percent: enter a number from 0 to 50. Prefilled example: 10.

Mortar yield per bag (from the bag label, example), in cu ft: enter 0.1 or more. Prefilled example: 0.67.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Units: switches the fields between the two unit systems.
  2. Wall length, in ft: enter 0 or more.
  3. Wall height, in ft: enter 0 or more.
  4. Unit length, actual (example value; measure your brick or block), in in: enter 0.5 or more.
  5. Unit height, actual (example value; measure your brick or block), in in: enter 0.5 or more.
  6. Mortar bed width (example value; depth of mortar under each unit), in in: enter 0.1 or more.
  7. Joint thickness, in in: enter a number from 0 to 1.
  8. Waste allowance, in percent: enter a number from 0 to 50.
  9. Mortar yield per bag (from the bag label, example), in cu ft: enter 0.1 or more.
  10. Read the result: Bags of mortar mix; the panel also shows Units per square foot of wall, Bricks or blocks in the wall and Mortar with waste (cubic feet).

How this calculator works

Each unit plus its share of joint takes (length + joint) × (height + joint) of wall face. The mortar per unit is that face minus the unit's own face, times the mortar bed width.

Bed width is the depth of mortar under each unit; enter the value for your units and bedding. Bags = cubic feet ÷ the yield printed on the bag, rounded up.

The formula

  1. P=144(ul+j)×(uh+j)
  2. U=ceil⁡(l×h×P)
  3. C=U×((ul+j)×(uh+j)−ul×uh)×bed1,728×(1+w100)
  4. B=ceil⁡(Cy)
Symbols used in the formula
SymbolMeaningUnit
lWall lengthft
hWall heightft
ulUnit length, actual (example value; measure your brick or block)in
uhUnit height, actual (example value; measure your brick or block)in
bedMortar bed width (example value; depth of mortar under each unit)in
jJoint thicknessin
wWaste allowance%
yMortar yield per bag (from the bag label, example)cu ft
PUnits per square foot of wall
UBricks or blocks in the wall
CMortar with wastecubic feet
BBags of mortar mix
ceil(x)the smallest whole number not below x.

Worked example

Wall length20 ft
Wall height4 ft
Unit length, actual (example value; measure your brick or block)7.625 in
Unit height, actual (example value; measure your brick or block)2.25 in
Mortar bed width (example value; depth of mortar under each unit)3.625 in
Joint thickness0.375 in
Waste allowance10%
Mortar yield per bag (from the bag label, example)0.67 cu ft
Units per square foot of wall6.86
Bricks or blocks in the wall549
Mortar with waste (cubic feet)4.87
  1. P=144(7.625+0.375)×(2.25+0.375)=6.85714
  2. U=ceil⁡(20×4×6.85714)=549
  3. C=549×((7.625+0.375)×(2.25+0.375)−7.625×2.25)×3.6251,728×(1+10100)=4.8695
  4. B=ceil⁡(4.86950.67)=8

Bags of mortar mix 8

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How many bricks are in a square foot of wall?

For a 7-5/8 × 2-1/4 in unit with 3/8 in joints, 144 ÷ (8 × 2.625) = 6.86 units per square foot of wall.

Questions answered

Related calculators