Open Channel Flow Calculator
Test cases replayed : 2 of 2 match · Methodology · No outside source listed
Manning's equation estimates uniform flow in a ditch, canal or partly full channel. Enter its shape, depth, slope and roughness.
Result
Discharge (ft³/s)
Flow area (ft²)
- Wetted perimeter (ft)
- Hydraulic radius (ft)
- Mean velocity (ft/s)
- Froude number
Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.
This browser did not allow copying. The sentence is in the box below, already selected: copy it with your keyboard or the menu.
How to use this calculator
Fill in the fields in this order; each step takes you to its field.
- Bottom width, in ft: enter 0 or more.
- Flow depth, in ft: enter 0 or more.
- Side slope, horizontal per 1 vertical (0 = rectangular): enter 0 or more.
- Channel slope (ft per ft): enter 0 or more.
- Manning's roughness coefficient n: enter 0 or more.
- Read the result: Discharge (ft³/s); the panel also shows Flow area (ft²), Wetted perimeter (ft), Hydraulic radius (ft), Mean velocity (ft/s) and Froude number.
How this calculator works
Manning's equation (Robert Manning, 1891), SI form: V = (1/n) × R^(2/3) × S^(1/2), where V is the mean velocity in m/s, R = A ÷ P the hydraulic radius in meters, S the slope and n the roughness coefficient. In US units the same law reads V = (1.486/n) × R^(2/3) × S^(1/2), since 1.486 = (1 ÷ 0.3048)^(1/3).
For a trapezoid of bottom width b, depth y and side slope z: A = (b + z y) y and P = b + 2y √(1 + z²). Discharge Q = V × A.
Froude number Fr = V ÷ √(g × D), with D = A ÷ top width the hydraulic depth: below 1 the flow is subcritical, above 1 supercritical. Manning's n comes from published tables for the channel lining; the default is only an example.
Unit conversions: NIST Special Publication 811, Appendix B (nist.gov, read October 27, 2026). 1 ft = 0.3048 m.
The formula
| Symbol | Meaning | Unit |
|---|---|---|
| Bottom width | ft | |
| Flow depth | ft | |
| Side slope, horizontal per 1 vertical (0 = rectangular) | ||
| Channel slope | ft per ft | |
| Manning's roughness coefficient n | ||
| Flow area | ft² | |
| Wetted perimeter | ft | |
| Hydraulic radius | ft | |
| Mean velocity (ft/s) | ||
| Discharge (ft³/s) |
Worked example
| Bottom width | 4 ft |
|---|---|
| Flow depth | 2 ft |
| Side slope, horizontal per 1 vertical (0 = rectangular) | 0 |
| Channel slope (ft per ft) | 0.001 |
| Manning's roughness coefficient n | 0.013 |
| Flow area (ft²) | 8 |
|---|---|
| Wetted perimeter (ft) | 8 |
| Hydraulic radius (ft) | 1 |
| Mean velocity (ft/s) | 3.6145 |
| Froude number | 0.4506 |
Discharge (ft³/s) 28.9162
Each step uses the unrounded value of the step before it; figures on this page are rounded for display.
Frequently asked questions
What does Manning's n mean?
It describes how rough the channel lining is: smooth linings have a small n and weedy or rocky channels a large one, which slows the flow.
Does Manning's equation work for a pipe flowing full?
It can be used for gravity sewers and culverts, but pressurized pipes are usually sized with Darcy–Weisbach or Hazen–Williams instead.