Orifice Flow Calculator
Test cases replayed : 2 of 2 match · Methodology · No outside source listed
An orifice turns a pressure drop into a flow rate. Enter the hole and pipe diameters, the pressure difference and the discharge coefficient.
Result
Flow rate (US gal/min)
Diameter ratio β = d/D
- Flow rate (ft³/s)
- Flow rate (L/s)
- Velocity through the orifice (ft/s)
Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.
This browser did not allow copying. The sentence is in the box below, already selected: copy it with your keyboard or the menu.
How to use this calculator
Fill in the fields in this order; each step takes you to its field.
- Orifice diameter, in in: enter 0 or more.
- Pipe inside diameter (0 for a hole in a large tank), in in: enter 0 or more.
- Pressure drop across the orifice, in psi: enter 0 or more.
- Specific gravity of the liquid: enter 0 or more.
- Discharge coefficient Cd: enter a number from 0 to 1.
- Read the result: Flow rate (US gal/min); the panel also shows Diameter ratio β = d/D, Flow rate (ft³/s), Flow rate (L/s) and Velocity through the orifice (ft/s).
How this calculator works
Orifice equation for a liquid (the form used in ISO 5167-2): Q = Cd × A × √(2 Δp ÷ (ρ (1 − β⁴))), where A is the orifice area, Δp the pressure drop, ρ = SG × 1,000 kg/m³, β = d ÷ D the ratio of orifice to pipe diameter and Cd the discharge coefficient.
Cd depends on the orifice shape and Reynolds number; take it from the meter's data or the standard. The default of 0.61 is only an example for a sharp-edged hole. For gases an expansibility factor is also needed.
Unit conversions: NIST Special Publication 811, Appendix B (nist.gov, read October 27, 2026). 1 in = 0.0254 m, 1 psi = 6,894.757 Pa, 1 US gallon = 3.785411784 L, 1 ft³ = 28.316846592 L.
The formula
| Symbol | Meaning | Unit |
|---|---|---|
| Orifice diameter | in | |
| Pipe inside diameter (0 for a hole in a large tank) | in | |
| Pressure drop across the orifice | psi | |
| Specific gravity of the liquid | ||
| Discharge coefficient Cd | ||
| Diameter ratio β = d/D | ||
| Flow rate (US gal/min) |
Worked example
| Orifice diameter | 1 in |
|---|---|
| Pipe inside diameter (0 for a hole in a large tank) | 3 in |
| Pressure drop across the orifice | 5 psi |
| Specific gravity of the liquid | 1 |
| Discharge coefficient Cd | 0.61 |
| Diameter ratio β = d/D | 0.3333 |
|---|---|
| Flow rate (ft³/s) | 0.0912 |
| Flow rate (L/s) | 2.5825 |
| Velocity through the orifice (ft/s) | 16.7214 |
Flow rate (US gal/min) 40.9338
Each step uses the unrounded value of the step before it; figures on this page are rounded for display.
Frequently asked questions
Why does flow grow with the square root of the pressure drop?
Pressure turns into kinetic energy, which grows with velocity squared, so doubling the flow takes four times the pressure drop.
What does the β ratio change?
With the orifice large compared with the pipe, the liquid already arrives with speed, which the 1 − β⁴ term accounts for.