Skip to content
FiftyCalc Free calculators for all 50 states

Painting Cost Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the surface to paint, the number of coats, the coverage printed on the paint can, the price per gallon and the painter's rate per square foot.

Result

Sample figures

Estimated total—

Paint needed (gallons) —

  • Paint cost ($)—
  • Labor cost ($)—
  • Gallons to buy—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Painting Cost Calculator

Surface to paint, in sq ft: enter 0 or more. Prefilled example: 1,200.

Number of coats: enter 1 or more. Prefilled example: 2.

Coverage per gallon (from the paint can), in sq ft: enter 1 or more. Prefilled example: 350.

Paint price per gallon, in dollars: enter 0 or more. Prefilled example: 45.

Labor rate per square foot of surface, all coats (0 if DIY), in dollars: enter 0 or more. Prefilled example: 2.5.

Affiliate link

This is an affiliate link: FiftyCalc may earn a commission if you buy through it. This does not change the result.

Homestyler is an online home design tool with a free basic plan and paid memberships. Visit Homestyler

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Surface to paint, in sq ft: enter 0 or more.
  2. Number of coats: enter 1 or more.
  3. Coverage per gallon (from the paint can), in sq ft: enter 1 or more.
  4. Paint price per gallon, in dollars: enter 0 or more.
  5. Labor rate per square foot of surface, all coats (0 if DIY), in dollars: enter 0 or more.
  6. Read the result: Estimated total; the panel also shows Paint needed (gallons), Gallons to buy, Paint cost ($) and Labor cost ($).

How this calculator works

Paint needed = surface × coats ÷ coverage per gallon, rounded up to whole gallons to buy. Manufacturers print the spread rate on the can; rough, porous or very dark surfaces cover less.

Labor = surface × the painter's rate per square foot. Painters quote either per square foot of surface or per hour; with an hourly quote, divide the job total by the area to get the rate.

Total = paint + labor. Primer, tape, caulk, repairs, trim, ladders or scaffolding are not included unless your rate covers them.

The formula

  1. Gal=a×ccov
  2. Ca=ceil⁡(Gal)
  3. P=Ca×gp
  4. L=a×lab
  5. T=P+L
Symbols used in the formula
SymbolMeaningUnit
aSurface to paintsq ft
cNumber of coats
covCoverage per gallon (from the paint can)sq ft
gpPaint price per gallon$
labLabor rate per square foot of surface, all coats (0 if DIY)$
GalPaint neededgallons
CaGallons to buy
PPaint cost$
LLabor cost$
TEstimated total$
ceil(x)the smallest whole number not below x.

Worked example

Surface to paint1,200 sq ft
Number of coats2
Coverage per gallon (from the paint can)350 sq ft
Paint price per gallon$45
Labor rate per square foot of surface, all coats (0 if DIY)$2.5
Paint needed (gallons)6.9
Gallons to buy7
Paint cost ($)$315
Labor cost ($)$3,000
  1. Gal=1,200×2350=6.85714
  2. Ca=ceil⁡(6.85714)=7
  3. P=7×45=315
  4. L=1,200×2.5=3,000
  5. T=315+3,000=3,315

Estimated total $3,315

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How do I measure wall area?

Add the widths of the walls and multiply by the height, then subtract large openings: for example a 12 × 14 ft room with 8 ft walls has 2 × (12 + 14) × 8 = 416 sq ft before doors and windows.

How many gallons do I need for 1,200 sq ft with two coats?

At 350 sq ft per gallon: 1,200 × 2 ÷ 350 ≈ 6.9 gallons, so 7 gallons.

Why does exterior painting cost more?

Exterior jobs usually need more surface preparation and access equipment, which raises the rate per square foot.

Questions answered

Related calculators