Skip to content
FiftyCalc Free calculators for all 50 states

Plywood Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the area to cover and the sheet size to get the number of plywood or OSB sheets.

Result

Sample figures

Sheets needed—

Area to cover (square feet) —

  • Cost at your price—

The unit choice applies to the fields you fill in. Results stay in the units written with them.

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Plywood Calculator

Units: switches the fields between the two unit systems.

Length of the area, in ft: enter 0 or more. Prefilled example: 20.

Width of the area, in ft: enter 0 or more. Prefilled example: 12.

Sheet size

Sheet size: choose 4 × 8 ft (32 sq ft), 4 × 9 ft (36 sq ft) or 4 × 10 ft (40 sq ft). Prefilled example: 4 × 8 ft (32 sq ft).

Waste allowance (example value; adjust it to your layout), in percent: enter a number from 0 to 50. Prefilled example: 10.

Price per sheet (example), in dollars: enter 0 or more. Prefilled example: 45.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Units: switches the fields between the two unit systems.
  2. Length of the area, in ft: enter 0 or more.
  3. Width of the area, in ft: enter 0 or more.
  4. Sheet size: choose 4 × 8 ft (32 sq ft), 4 × 9 ft (36 sq ft) or 4 × 10 ft (40 sq ft).
  5. Waste allowance (example value; adjust it to your layout), in percent: enter a number from 0 to 50.
  6. Price per sheet (example), in dollars: enter 0 or more.
  7. Read the result: Sheets needed; the panel also shows Area to cover (square feet) and Cost at your price.

How this calculator works

Sheets = area × (1 + waste ÷ 100) ÷ sheet area, rounded up. A 4 × 8 ft sheet covers 32 square feet.

For a roof, enter the sloped roof area (footprint × pitch multiplier) as length × width. The waste allowance covers cuts at edges and openings; complex layouts need more.

The formula

  1. A=l×w
  2. Sh=ceil⁡(A×(1+wa÷100)s)
Symbols used in the formula
SymbolMeaningUnit
lLength of the areaft
wWidth of the areaft
sSheet size
waWaste allowance (example value; adjust it to your layout)%
AArea to coversquare feet
ShSheets needed
ceil(x)the smallest whole number not below x.

Worked example

Length of the area20 ft
Width of the area12 ft
Sheet size4 × 8 ft (32 sq ft)
Waste allowance (example value; adjust it to your layout)10%
Price per sheet (example)$45
Area to cover (square feet)240.00
Cost at your price$405
  1. A=20×12=240
  2. Sh=ceil⁡(240×(1+10÷100)32)=9

Sheets needed 9

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How many sheets of plywood for a 20 × 12 floor?

240 square feet plus a 10% allowance (the example value) is 264 square feet, so 9 sheets of 4 × 8.

Does plywood thickness change the count?

No. The count depends on area only; thickness changes the weight and the price per sheet.

Questions answered

Related calculators