Skip to content
FiftyCalc Free calculators for all 50 states

Poiseuille's Law Calculator

Test cases replayed : 3 of 3 match · Methodology · No outside source listed

Poiseuille's law gives the flow of a viscous fluid through a thin tube. Enter the tube's radius and length, the pressure difference and the viscosity.

Result

Sample figures

Flow rate (mL/s)—

Flow rate (L/min) —

  • Mean velocity (m/s)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Poiseuille's Law Calculator

Inner radius of the tube, in mm: enter 0 or more. Prefilled example: 2.

Tube length, in m: enter 0 or more. Prefilled example: 1.

Pressure difference: enter 0 or more. Prefilled example: 1,000.

Pressure unit

Pressure unit: choose pascals (Pa), kilopascals (kPa), psi or mmHg. Prefilled example: pascals (Pa).

Dynamic viscosity (mPa·s = cP): enter 0 or more. Prefilled example: 1.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Inner radius of the tube, in mm: enter 0 or more.
  2. Tube length, in m: enter 0 or more.
  3. Pressure difference: enter 0 or more.
  4. Pressure unit: choose pascals (Pa), kilopascals (kPa), psi or mmHg.
  5. Dynamic viscosity (mPa·s = cP): enter 0 or more.
  6. Read the result: Flow rate (mL/s); the panel also shows Flow rate (L/min) and Mean velocity (m/s).

How this calculator works

Hagen–Poiseuille law: Q = π r⁴ Δp ÷ (8 μ L), where r is the inner radius, Δp the pressure difference between the ends, μ the dynamic viscosity and L the length. It holds for steady laminar flow of a Newtonian fluid in a rigid round tube, well away from the entrance.

Because flow scales with r⁴, a small change in radius has a large effect. Check that the Reynolds number (ρ V D ÷ μ) stays low, roughly below 2,000, or the law no longer applies.

Unit conversions: NIST Special Publication 811, Appendix B (nist.gov, read October 27, 2026). 1 psi = 6,894.757 Pa, 1 mmHg (conventional) = 133.3224 Pa.

The formula

  1. Qml=π×(r÷1,000)4×dp×pu8×μ÷1,000×ln×1,000,000
Symbols used in the formula
SymbolMeaningUnit
rInner radius of the tubemm
lnTube lengthm
dpPressure difference
puPressure unit
μDynamic viscosity (mPa·s = cP)
QmlFlow rate (mL/s)

Worked example

Inner radius of the tube2 mm
Tube length1 m
Pressure difference1,000
Pressure unitpascals (Pa)
Dynamic viscosity (mPa·s = cP)1
Flow rate (L/min)0.377
Mean velocity (m/s)0.5
  1. Qml=3.14159×(2÷1,000)4×1,000×18×1÷1,000×1×1,000,000=6.28319

Flow rate (mL/s) 6.2832

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What happens to the flow if the radius doubles?

It rises 16 times (2⁴), with the same pressure and length.

Does Poiseuille's law apply to blood flow?

Only roughly: blood is not a Newtonian fluid and vessels are elastic, but the law explains why narrowed vessels cut flow so much.

Related calculators